Siemens SIPART PS2 Smart 6DR5010-0EN01-0AA0 Single-Acting Positioner
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the complete Siemens article number and the no-HART 4 to 20 mA electrical execution.
- Use only with a single-acting pneumatic linear or part-turn actuator.
- Keep linear travel within 3 to 130 mm or rotary travel within the supported NCS range.
- Provide instrument air from 1.4 to 7 bar at the specified cleanliness and dew-point class.
- Verify the 1/2-inch NPT electrical entry and 1/4-inch NPT pneumatic connections.
- Check the intrinsic-safety barrier and field circuit against the approved entity parameters.
- Restore the NCS alignment, controller settings, fail-safe action and AOM feedback scaling during commissioning.
Siemens · SIPART PS2 Smart
6DR5010-0EN01-0AA0 Single-Acting Electropneumatic Positioner with NCS and AOM
Siemens 6DR5010-0EN01-0AA0 is a SIPART PS2 Smart electropneumatic positioner for single-acting pneumatic linear and part-turn actuators. This exact execution uses a polycarbonate enclosure, wear-free non-contacting position detection, intrinsic-safety protection and an analog output module for 4 to 20 mA position feedback.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DR5010-0EN01-0AA0 |
| Product Type | Electropneumatic Smart Positioner |
| Core Function | Controls pneumatic linear and part-turn actuators from a 4 to 20 mA command signal |
| Application or Compatible Series | Single-acting industrial control valves and rotary actuators |
Exact Electrical Execution
Match the 4 to 20 mA version without HART and preserve the intrinsic-safety circuit design used by the installed loop.
Actuator and Thread Match
Confirm a single-acting linear or part-turn actuator together with 1/2-inch NPT electrical and 1/4-inch NPT pneumatic connections.
Feedback and Fail-Safe Setup
Verify the NCS sensor, analog position-feedback wiring and the required depressurization response when auxiliary power fails.
Product Overview
Siemens 6DR5010-0EN01-0AA0 is a SIPART PS2 Smart electropneumatic positioner for single-acting pneumatic linear and part-turn actuators. This exact execution uses a polycarbonate enclosure, wear-free non-contacting position detection, intrinsic-safety protection and an analog output module for 4 to 20 mA position feedback.
Uses an adaptive five-point controller and adjustable dead zone to position pneumatic actuators from the analog command signal. Measures actuator travel through a non-contacting NCS arrangement for linear or rotary applications. Includes the AOM option for an isolated 4 to 20 mA signal representing the actual actuator position.
Key Functions
Adaptive Valve Positioning
Uses an adaptive five-point controller and adjustable dead zone to position pneumatic actuators from the analog command signal.
Wear-Free Position Detection
Measures actuator travel through a non-contacting NCS arrangement for linear or rotary applications.
Analog Position Feedback
Includes the AOM option for an isolated 4 to 20 mA signal representing the actual actuator position.
Official Specifications
| Input Signal | Two-wire 4 to 20 mA without HART |
|---|---|
| Pneumatic Action | Single-acting |
| Position Detection | Non-contacting NCS |
| Enclosure Material | Glass-fiber-reinforced polycarbonate |
| Type of Protection | Intrinsic safety (Ex i) |
| Electrical Connection Thread | 1/2-inch NPT |
| Pneumatic Connection Thread | 1/4-inch NPT |
| Analog Position Feedback | 4 to 20 mA through the integrated AOM option |
| Air Supply Range | 1.4 to 7 bar |
| Controlled-State Air Consumption | 0.01 Nm3/h typical |
| Linear Actuator Travel | 3 to 130 mm |
| Part-Turn Measuring Range | 15 to 160 degrees with internal NCS |
| Controller Design | Adaptive five-point controller |
| Dead-Zone Adjustment | Adaptive or fixed from 0.1% to 10% |
| ADC Scanning Time | 10 ms |
| Position Resolution | 0.05% or better |
| Transmission Error | 0.2% or better |
| Degree of Protection | IP66 and NEMA 4X |
| Operating Temperature | -30 to +80 degrees C |
| Approximate Net Weight | 0.9 kg |
Frequently Asked Questions
Does 6DR5010-0EN01-0AA0 support HART communication?
No, this execution uses a conventional two-wire 4 to 20 mA command input without HART.
Which actuators can use 6DR5010-0EN01-0AA0?
Use it with a single-acting pneumatic linear or part-turn actuator within the specified travel or rotary measuring range.
What air supply is required for 6DR5010-0EN01-0AA0?
Provide clean instrument air between 1.4 and 7 bar and apply the specified ISO 8573-1 air-quality classes.
How is actual valve position returned from 6DR5010-0EN01-0AA0?
The installed analog output module supplies a 4 to 20 mA signal proportional to the measured actuator position.
What happens when auxiliary power fails on 6DR5010-0EN01-0AA0?
The standard fail-safe configuration depressurizes the single-acting actuator.
Which connection threads are fitted to 6DR5010-0EN01-0AA0?
The electrical entry is 1/2-inch NPT and the pneumatic ports are 1/4-inch NPT.
What must be checked before replacing 6DR5010-0EN01-0AA0?
Confirm the no-HART input, single-acting actuator, NCS geometry, intrinsic-safety parameters, thread types, feedback wiring and stored commissioning settings.