EN
Siemens SIMATIC S7-400 6ES7417-4XT05-0AB0 CPU 417-4
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7417-4XT05-0AB0 CPU 417-4
Official Siemens identification and technical data for 6ES7417-4XT05-0AB0, prepared for accurate replacement matching and quotation.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7417-4XT05-0AB0 |
| Product Type | CPU 417-4 |
| Core Function | High-performance S7-400 control with 30 MB work memory and multiple PROFIBUS interfaces |
| Application / Compatible Series | SIMATIC S7-400 automation systems |
Exact Identification
Match the complete Siemens article number 6ES7417-4XT05-0AB0 and the photographed hardware revision.
Interfaces
MPI/DP, PROFIBUS DP and two plug-in interface-module slots
Configuration Check
Confirm 30 MB work memory: 15 MB code and 15 MB data; firmware V5.3 before replacement.
Product Overview
6ES7417-4XT05-0AB0 is officially identified by Siemens as SIMATIC S7-400 CPU 417-4. 30 MB work memory: 15 MB code and 15 MB data; firmware V5.3.
The complete article number 6ES7417-4XT05-0AB0 should be matched against the installed hardware, nameplate and official system documentation. Similar revisions can differ in memory, interfaces, operating system or configuration.
Key Functions
Model-Specific Configuration
6ES7417-4XT05-0AB0: 30 MB work memory: 15 MB code and 15 MB data; firmware V5.3.
System Interface
6ES7417-4XT05-0AB0: MPI/DP, PROFIBUS DP and two plug-in interface-module slots.
Replacement Control
6ES7417-4XT05-0AB0: verify the complete article number, hardware revision and official project documentation before replacement.
Official Specifications
| Hardware Functional Status | 04 |
|---|---|
| Firmware Version | V5.3 |
| Engineering Software | STEP 7 V5.3 SP2 or higher with hardware update |
| Isochronous Mode | Supported for PROFIBUS |
| CiR Basic Synchronization Time | 60 ms |
| CiR Time per I/O Byte | 7 µs |
| Supply Method | Via system power supply |
| Backplane Current at 5 V DC | 1.5 A typical; 1.8 A maximum |
| Power Loss | 7.5 W typical |
| Integrated Work Memory | 30 MB |
| Program Work Memory | 15 MB |
| Data Work Memory | 15 MB |
| Maximum FEPROM Load Memory | 64 MB |
| S7 Timers | 2,048 |
| MPI/PROFIBUS Data Rate | Up to 12 Mbit/s |
| Dimensions | 50 x 290 x 219 mm |
| Approximate Weight | 0.9 kg |
Official source: Siemens technical data for 6ES7417-4XT05-0AB0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
Which STEP 7 version is required to engineer 6ES7417-4XT05-0AB0?
Use STEP 7 V5.3 SP2 or later with the applicable hardware update.
How is the work memory divided on 6ES7417-4XT05-0AB0?
The integrated 30 MB is divided into 15 MB for program code and 15 MB for data.
Which communication buses must be checked for 6ES7417-4XT05-0AB0?
Verify the MPI/PROFIBUS DP interface, the second PROFIBUS DP interface and any installed IF 964-DP modules against the project configuration.
Can configuration changes be made in RUN with 6ES7417-4XT05-0AB0?
Configuration in RUN is supported; the official data specifies a 60 ms basic synchronization time plus 7 µs per I/O byte.
What load-memory option is supported by 6ES7417-4XT05-0AB0?
A FLASH memory card can provide up to 64 MB of expandable FEPROM load memory.
How is 6ES7417-4XT05-0AB0 powered in the rack?
Power is supplied through the SIMATIC S7-400 system power supply and backplane bus.
What must be compared before replacing 6ES7417-4XT05-0AB0?
Match the complete article number, hardware status 04, firmware V5.3, memory configuration, interface modules and STEP 7 project.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7417-4XT05-0AB0
- Match the complete article number 6ES7417-4XT05-0AB0 without shortening the suffix.
- Confirm the installed SIMATIC S7-400 family and hardware revision.
- Verify MPI/DP, PROFIBUS DP and two plug-in interface-module slots.
- Confirm included connectors, memory media and accessories in the written quotation.
