EN
Siemens SIMATIC S7-300 6ES7332-5HB01-0AB0 SM 332 2 AO Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIMATIC S7-300 6ES7332-5HB01-0AB0 SM 332 2 AO Module
Official Siemens identification and technical data for 6ES7332-5HB01-0AB0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7332-5HB01-0AB0 |
|---|---|
| Manufacturer | Siemens |
| Platform | SIMATIC S7-300 |
| Product Type | SM 332 Analog Output Module |
| Country of Origin | Germany |
Exact Identification
Match the complete 6ES7332-5HB01-0AB0 article number and installed hardware.
System Matching
Confirm compatibility with the installed SIMATIC S7-300 configuration.
Configuration Check
Verify electrical data, connections and official Siemens documentation.
Product Overview
6ES7332-5HB01-0AB0 is officially identified by Siemens as an isolated SIMATIC S7-300 SM 332 analog output module with two voltage/current outputs.
The complete article number must be matched against the installed SIMATIC S7-300 hardware, nameplate and official Siemens documentation. Similar revisions can differ in ratings, I/O, interfaces, accessories and replacement conditions.
Key Functions
Two Analog Outputs
6ES7332-5HB01-0AB0 provides two isolated analog outputs for voltage or current signals.
11/12-Bit Resolution
Siemens specifies 11/12-bit resolution for 6ES7332-5HB01-0AB0.
Active Backplane Support
6ES7332-5HB01-0AB0 can be removed or inserted with an active backplane bus.
Official Specifications
| Manufacturer | Siemens |
|---|---|
| Series | SIMATIC S7-300 |
| Article Number | 6ES7332-5HB01-0AB0 |
| Product Type | SM 332 analog output module |
| Analog Outputs | 2 |
| Signal Types | Voltage / current |
| Resolution | 11/12 bit |
| Connection | 20-pole |
| Net Weight | 0.246 kg |
| Packaging Dimension | 13.10 x 15.20 x 5.20 cm |
| Country of Origin | Germany |
| Product Lifecycle | PM400 Phase Out; since 01 Oct 2023 |
Official source: Siemens official product data for 6ES7332-5HB01-0AB0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
What is Siemens 6ES7332-5HB01-0AB0?
Siemens identifies 6ES7332-5HB01-0AB0 as an isolated SIMATIC S7-300 SM 332 analog output module with two voltage/current outputs.
Which Siemens platform uses 6ES7332-5HB01-0AB0?
6ES7332-5HB01-0AB0 is specified for the SIMATIC S7-300 platform.
What official configuration is specified for 6ES7332-5HB01-0AB0?
2 analog outputs for voltage or current; 11/12-bit resolution; 20-pole connection.
Which connections or I/O does 6ES7332-5HB01-0AB0 provide?
Two analog voltage/current outputs through a 20-pole connection.
What should be checked before installing 6ES7332-5HB01-0AB0?
Verify the supply, signal levels, terminal allocation, surrounding hardware and installation instructions in the official Siemens documentation.
How should 6ES7332-5HB01-0AB0 be matched for replacement?
Match the complete 6ES7332-5HB01-0AB0 article number, installed hardware revision and application configuration; do not shorten or substitute the ordering code.
Which official Siemens source confirms 6ES7332-5HB01-0AB0?
The Siemens official product data and system documentation linked in the Official Specifications section confirm the identification and technical facts for 6ES7332-5HB01-0AB0.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7332-5HB01-0AB0
- Match the full 6ES7332-5HB01-0AB0 ordering code without shortening the suffix.
- Confirm the installed SIMATIC S7-300 system and hardware revision.
- Verify supply, I/O or interface data against the nameplate and Siemens manual.
- Confirm required terminal blocks, connectors and accessories in the written quotation.
