Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens simatic rf180c 6gt2002 1jd00 m12 7 8 connection block-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC RF180C 6GT2002-1JD00 M12 7/8 Connection Block

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Confirm on nameplate
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC IDENT · RF18XC CONNECTION BLOCK

SIMATIC RF180C 6GT2002-1JD00 M12 / 7/8 Connection Block

RF18xC connection block with a D-coded M12 Industrial Ethernet interface and a 7/8-inch 5-pin 24 V DC supply connection for RF180C, RF182C and RFID 181EIP.

At a Glance

Brand / Manufacturer Siemens
Model / Article Number RF180C / 6GT2002-1JD00
Product Type RFID PROFINET/Ethernet connection block
Core Function Provides Industrial Ethernet and 24 V DC field connections
Application / Compatible Series RF180C, RF182C and RFID 181EIP
Network Connection
D-coded M12 Industrial Ethernet, 10 to 100 Mbit/s.
Power Connection
7/8-inch 5-pin supply connector for 24 V DC systems.
Field Installation
IP67 housing with four-screw fastening.
Product Overview

6GT2002-1JD00 is officially identified by Siemens as Connection block for SIMATIC RF180C and RF182C with D-coded M12 Industrial Ethernet and a 5-pole 7/8-inch power connection.

The complete article number 6GT2002-1JD00 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, connector design or approved system use.

Ordering focus: provide the installed 6GT2002-1JD00 nameplate, hardware revision and cabinet or field configuration for quotation verification.
Key Functions

Model-Specific Configuration

6GT2002-1JD00: Supports 10 to 100 Mbit/s Industrial Ethernet through a D-coded M12 interface.

System Interface

6GT2002-1JD00: Uses a 5-pole 7/8-inch connector for 24 V DC supply; rated supply range is 20 to 30 V DC.

Replacement Control

6GT2002-1JD00: IP67 zinc die-cast connection block with four Ethernet status LEDs and four supplied mounting screws.

Official Specifications
Industrial Ethernet Transfer Rate 10 to 100 Mbit/s
Ethernet Connector M12, D-coded
Power Connector 7/8-inch, 5-pin
Housing Material Die-cast zinc
Housing Color Silver
Maximum Fastening Torque 1.3 N·m
Rated Supply Voltage 24 V DC
Permissible Voltage Range 20 V DC to 30 V DC
Loop-Through Current, Maximum 8 A DC
Operating Temperature 0 °C to +60 °C
Storage and Transport Temperature -40 °C to +70 °C
Protection Rating IP67
Shock Acceleration 300 m/s²
Vibration Acceleration 100 m/s²
Dimensions 60 × 24 × 79 mm
Net Weight 0.23 kg
Fastening Method Four screws included
Status Display Four Ethernet status LEDs
Official source: Siemens Industry Mall technical data for 6GT2002-1JD00. Technical values shown above are limited to the official Siemens product data.
Frequently Asked Questions

Which SIMATIC Ident units can use 6GT2002-1JD00?

It is specified for RF180C, RF182C and RFID 181EIP units.

What Industrial Ethernet cable connection is required for 6GT2002-1JD00?

Use a D-coded M12 connection supporting 10 to 100 Mbit/s.

How is field power connected to 6GT2002-1JD00?

The supply connection is a 7/8-inch 5-pin interface for a 24 V DC system.

Can 6GT2002-1JD00 be installed in an IP67 field enclosure?

The die-cast zinc housing itself is rated IP67 when correctly assembled.

What fastening torque applies when installing 6GT2002-1JD00?

Use the four supplied screws and do not exceed 1.3 N·m.

What operating temperature is permitted for 6GT2002-1JD00?

The specified operating range is 0 °C to +60 °C.

What should be checked when commissioning 6GT2002-1JD00?

Confirm the 20 to 30 V DC supply, Ethernet link status, cable coding and loop-through current.

Compatibility & Ordering Notes
Before ordering 6GT2002-1JD00: compare the full article number, hardware revision, official Siemens configuration, electrical ratings, connectors and any required accessories.

Compatibility Checklist for 6GT2002-1JD00

  • Match the complete article number 6GT2002-1JD00 without shortening the suffix.
  • Confirm the installed SIMATIC Ident RF18xC family and hardware revision.
  • Verify: Supports 10 to 100 Mbit/s Industrial Ethernet through a D-coded M12 interface.
  • Confirm included connectors and accessories in the written quotation.
Hot Selling Models
PW6K1R2
CP037-01 MK7
QMX3.P44-1BSC
TLS3-GD2
WV-S2110
FDAI92EX
CPY000U200
333D
DCA /4-20mA /DH1L1 /117AC
LG-003551
SB-6BS-EU
RK221825-AN
KFA5-SR2-Ex1.W
LFC7520/00
SP12-61R-S8

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.