EN
Siemens SIMATIC RF 6GT2301-0CA00 SLG 72 Read/Write Device
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6GT2301-0CA00 SLG 72 Read/Write Device
Officially documented SIMATIC RF / MOBY E component for 13.56 MHz industrial identification with MOBY E data carriers.
At a Glance
| Brand / Manufacturer | Siemens |
|---|---|
| Model / Article Number | 6GT2301-0CA00 |
| Product Type | SLG 72 Read/Write Device |
| Core Function | Full Siemens article number 6GT2301-0CA00 for exact spare-part matching. |
| Application / Compatible Series | SIMATIC RF / MOBY E |
Exact Identification
Match the complete article number 6GT2301-0CA00, photographed nameplate and installed firmware or hardware revision before replacement.
Interface Arrangement
Confirm RS422 serial connection at 19.2 kbit/s used by the installed project.
Configuration Check
Verify MOBY E system configuration, compatible data carriers and the installed interface cable before commissioning.
Product Overview
Siemens SIMATIC RF 6GT2301-0CA00 SLG 72 Read/Write Device is an officially documented SIMATIC RF / MOBY E product designed for 13.56 MHz industrial identification with MOBY E data carriers. Its article number identifies the exact hardware variant and should be matched in full when planning a replacement or spare.
The unit provides RS422 serial connection at 19.2 kbit/s. Engineering, firmware, memory, rack, field wiring and network settings must be checked against the active project before installation.
Key Functions
Model-specific identification
Full Siemens article number 6GT2301-0CA00 for exact spare-part matching.
System role
Designed for 13.56 MHz industrial identification with MOBY E data carriers.
Integrated communication
Provides RS422 serial connection at 19.2 kbit/s.
Engineering continuity
Check MOBY E system configuration, compatible data carriers and the installed interface cable.
Power planning
24 V DC, permissible range 20 to 30 V; typical current 180 mA
Official Specifications
| Product Family / Type | MOBY E / SLG 72 read/write device |
|---|---|
| Operating Frequency | 13.56 MHz |
| Serial Interface | RS422 |
| Transmission Rate | 19.2 kbit/s |
| Operating Distance | 0–70 mm, depending on data carrier |
| Maximum Distance | 100 mm, depending on data carrier |
| Cable Length | Up to 120 m standard; up to 1,000 m with conditions |
| Supply Voltage | 24 V DC; 20–30 V permissible |
| Current Consumption | Approx. 180 mA; maximum 700 mA |
| Degree of Protection | IP65 |
| Ambient Temperature | −25 °C to +70 °C |
| Dimensions (W × H × D) | 160 × 80 × 40 mm |
| Weight | Approx. 550 g |
Frequently Asked Questions
Which identification system is compatible with 6GT2301-0CA00?
The read/write device is designed for the MOBY E system operating at 13.56 MHz.
Which serial settings should be matched when commissioning 6GT2301-0CA00?
Use the documented RS-422 connection and a transmission rate of 19.2 kbit/s.
What read distance should be expected from 6GT2301-0CA00?
The operating distance is typically 0 to 70 mm, with a maximum of 100 mm under suitable conditions.
How far can the communication cable run from 6GT2301-0CA00?
The standard cable length is up to 120 m and can reach 1,000 m when the specified installation conditions are met.
What power supply is required by 6GT2301-0CA00?
Provide 24 V DC within a 20 to 30 V range; current consumption is about 180 mA typical and 700 mA maximum.
Which environmental limits apply to 6GT2301-0CA00?
The enclosure is rated IP65 and the stated operating temperature range is -25 °C to +70 °C.
What installation checks improve reading reliability for 6GT2301-0CA00?
Maintain the specified mounting clearances, control nearby metal and interference sources, then verify the tag read zone in the installed position.
Compatibility & Ordering Notes
SLG 72 Read/Write Device Installation Checklist for 6GT2301-0CA00
- Compare every character of the nameplate article number.
- Confirm the firmware or hardware revision supported by the engineering project.
- Check rack, connector, memory, power and environmental requirements.
- Record addressing, station names, redundancy and network parameters before removal.
- Keep a verified project backup and follow the official manufacturer installation instructions.
