Siemens SIMATIC NET 6GK1561-4AA00 CP 5614 PCI PROFIBUS Processor
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the original CP 5614 article rather than CP 5614 A2 or A3 hardware.
- Use a PC with a compatible PCI slot and supported SIMATIC NET HARDNET-PB software.
- Back up both master and slave interface configurations before exchange.
- Retain PROFIBUS station addresses, GSD files, baud rates and termination settings.
- Verify application access points and DP-Base or other communication interfaces.
- Power down the PC before installation because the card is not approved for hot plugging.
- Recheck operating-system and driver support when migrating to a later CP generation.
Siemens · SIMATIC NET CP 5614
6GK1561-4AA00 PCI PROFIBUS Communications Processor
Siemens 6GK1561-4AA00 is the original SIMATIC NET CP 5614 PCI communications processor for PROFIBUS. The dual-interface HARDNET card supports PC-based DP master and slave communication with onboard preprocessing for deterministic industrial data exchange.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1561-4AA00 |
| Product Type | HARDNET PROFIBUS PC Communications Processor |
| Core Function | Connects an industrial PC to PROFIBUS as a DP master and DP slave |
| Application or Compatible Series | SIMATIC NET HARDNET-PB PC communication systems |
Original CP 5614 Identification
Match the -4AA00 article because CP 5614 A2 and A3 are later hardware products with different order numbers.
Dual PROFIBUS Roles
Preserve the master and slave network assignments, addresses, GSD configuration and bus parameters used by both interfaces.
Software Compatibility
Confirm the installed SIMATIC NET HARDNET-PB software release and operating-system support before replacing the card.
Product Overview
Siemens 6GK1561-4AA00 is the original SIMATIC NET CP 5614 PCI communications processor for PROFIBUS. The dual-interface HARDNET card supports PC-based DP master and slave communication with onboard preprocessing for deterministic industrial data exchange.
Provides separate PROFIBUS resources for PC-based master communication and an integrated slave interface. Transfers cyclic process-image data through onboard preprocessing instead of relying entirely on the host CPU. Supports the applicable DP, FMS and S7 communication software packages for the original CP generation.
Key Functions
DP Master and Slave Processing
Provides separate PROFIBUS resources for PC-based master communication and an integrated slave interface.
High-Speed Process-Image Access
Transfers cyclic process-image data through onboard preprocessing instead of relying entirely on the host CPU.
Multi-Protocol SIMATIC NET Use
Supports the applicable DP, FMS and S7 communication software packages for the original CP generation.
Official Specifications
| Host-Bus Form | PCI communications card |
|---|---|
| PROFIBUS Interfaces | Two electrical PROFIBUS connections for master and slave operation |
| Physical Layer | RS 485 |
| Network Connector Type | 9-pin D-sub sockets |
| Supported Transfer Rates | 9.6, 19.2, 45.45, 93.75, 187.5 and 500 kbit/s; 1.5, 3, 6 and 12 Mbit/s |
| Process-Image Read Throughput | 3 KB/ms from the PC |
| Process-Image Write Throughput | 8 KB/ms from the PC |
| Average Signal Propagation | 50 microseconds plus bus propagation time |
| Maximum Slave Propagation | 100 microseconds plus bus propagation time |
| Simultaneous Card Capacity | Up to four CP 5613 or CP 5614 cards in one PC |
| PC Communication Class | HARDNET PROFIBUS with onboard communication preprocessing |
| Programming Interface | DP-Base and SIMATIC NET communication interfaces |
| Master Communication | PROFIBUS DP master operation |
| Slave Communication | Independent PROFIBUS DP slave operation |
Frequently Asked Questions
Can 6GK1561-4AA00 operate as both a PROFIBUS master and slave?
Yes, the dual-interface processor supports master communication and an independent slave function when configured with the matching SIMATIC NET software.
Which bus rates can I use with 6GK1561-4AA00?
Select a standard PROFIBUS rate from 9.6 kbit/s through 12 Mbit/s that matches every device on the segment.
How many 6GK1561-4AA00 cards can one PC use?
A system can operate up to four cards from the applicable CP 5613 and CP 5614 family at the same time.
Can I hot-plug 6GK1561-4AA00 in an industrial PC?
No, shut down the PC and follow the approved PCI installation and electrostatic-discharge procedure before inserting or removing the card.
What should I back up before replacing 6GK1561-4AA00?
Save the PC-station configuration, access points, master and slave addresses, GSD data, bus parameters and communication application settings.
Can I replace 6GK1561-4AA00 with a CP 5614 A2 without checking software?
The later card requires a compatible SIMATIC NET software release and the PC station must be rechecked before commissioning.
What should I inspect when 6GK1561-4AA00 stops exchanging data?
Check both PROFIBUS connectors, termination, station addresses, selected access point, driver status and matching bus parameters.