Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens simatic et 200s 6es7134 4nb00 0ab0 2ai tc hf module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC ET 200S 6ES7134-4NB00-0AB0 2 AI TC HF Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200S • THERMOCOUPLE ANALOG INPUT

6ES7134-4NB00-0AB0 2 AI TC High Feature Module

Official Siemens technical data for a two-channel ET 200S thermocouple input module, organized for engineering selection and replacement matching.

At a Glance

Brand Siemens
Model 6ES7134-4NB00-0AB0
Product Type SIMATIC ET 200S 2 AI TC High Feature module
Core Function Converts thermocouple signals into ET 200S process values
Application / Compatible Series SIMATIC ET 200S temperature-measurement stations

Exact Identification

Match the full Siemens order number and installed hardware version.

Engineering Fit

Confirm electrical data, terminals and the target SIMATIC system.

Configuration Check

Verify wiring and configuration against the official Siemens manual.

Product Overview

6ES7134-4NB00-0AB0 is officially identified by Siemens as SIMATIC ET 200S High Feature analog input module with two thermocouple channels, 15-bit plus sign resolution and internal temperature compensation.

The complete article number 6ES7134-4NB00-0AB0 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, terminal design, packing quantity or approved system use.

Ordering focus: provide the installed 6ES7134-4NB00-0AB0 nameplate, hardware revision and system configuration for quotation verification.
Key Functions

Model-Specific Configuration

6ES7134-4NB00-0AB0: Provides two analog input channels for thermocouple measurement.

System Interface

6ES7134-4NB00-0AB0: Uses 15-bit plus sign resolution with internal temperature compensation.

Replacement Control

6ES7134-4NB00-0AB0: The 15 mm module supports Siemens-documented thermocouple types and diagnostic functions.

Official Specifications
Load Voltage L+ 24 V DC from the power module
L+ Current, No Load 30 mA max.
Backplane-Bus Current 10 mA max. at 3.3 V DC
Power Loss 0.6 W typical
Address Space 4 bytes max.
Voltage Measuring Range -80 mV to +80 mV
Input Resistance 1 MΩ
Supported Thermocouples Types B, C, E, J, K, L, N, R, S and T
Internal Temperature Compensation Supported with TM-E15S24-AT or TM-E15C24-AT
External Temperature Compensation One external compensating box per channel
Shielded Cable Length 50 m max.
Conversion Resolution 16 bit including sign (15 bit + sign)
Integration Time 16.7 ms or 20 ms
Interference-Frequency Rejection 50 Hz or 60 Hz
Conversion Time per Channel 66 ms or 80 ms
Isolation Test Voltage 500 V DC
Dimensions (W × H × D) 15 × 81 × 52 mm
Approximate Weight 40 g
Frequently Asked Questions

Which ET 200S terminal modules provide internal cold-junction compensation for 6ES7134-4NB00-0AB0?

Internal compensation is supported with TM-E15S24-AT or TM-E15C24-AT terminal modules.

Which thermocouple families can engineers connect to 6ES7134-4NB00-0AB0?

Types B, C, E, J, K, L, N, R, S and T are linearized; a ±80 mV voltage range is also selectable.

How should mains-frequency rejection be selected for 6ES7134-4NB00-0AB0?

Use the 20 ms integration setting for 50 Hz environments or 16.7 ms for 60 Hz environments.

Which diagnostics are available on 6ES7134-4NB00-0AB0?

Wire break, group error and overflow/underflow diagnostics are available, with a red SF group-error LED.

What sensor-cable limit applies to 6ES7134-4NB00-0AB0?

The official data allows up to 50 m of shielded cable.

How are the analog inputs isolated on 6ES7134-4NB00-0AB0?

The channels are not isolated from each other, but they are isolated from the backplane bus and load voltage.

What should be checked before installing 6ES7134-4NB00-0AB0?

Confirm the 24 V DC load supply, terminal-module type, thermocouple type, compensation method and shield termination.

Compatibility & Ordering Notes
Before ordering 6ES7134-4NB00-0AB0: compare the full article number, hardware revision, official Siemens configuration, electrical ratings, terminals or connectors and required accessories.

Compatibility Checklist for 6ES7134-4NB00-0AB0

  • Match the complete article number 6ES7134-4NB00-0AB0 without shortening the suffix.
  • Confirm the installed SIMATIC ET 200S system and hardware revision.
  • Verify: Provides two analog input channels for thermocouple measurement.
  • Confirm included terminals, connectors and accessories in the written quotation.
Hot Selling Models
KFD2-ST2-Ex1.LB 109560S
MA2-08E
DDRM104
1700-0326 ST-133
330101-00-16-10-02-05
MINI-PS-100-240AC
CA10.A202
PSM24-12B
5WG1 532-1DB51
CCT551011
SDV531-L33
QSM3-XW-C
1C31234G01
VR-16
TP-0416

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.