EN
Siemens SIMADYN D 6DD2920-0BB0 LES1 Interface Module
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm whether the installed carrier is SAV1, SAV21 or SAV22.
- Label the complete connection set before removing the old interface board.
- De-energize the carrier before insertion or removal.
- Check module seating, retaining hardware and protective cabinet installation before startup.
SIEMENS SIMADYN D · LES1 INTERFACE MODULE
Siemens SIMADYN D 6DD2920-0BB0 LES1 Interface Module
Model-specific interface identification, carrier compatibility and technical system data for replacement planning.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6DD2920-0BB0 |
| Product Type | LES1 interface module |
| Core Function | Provides interface connectivity for SIMADYN D carrier electronics |
| Application / Compatible Series | SIMADYN D systems using SAV1, SAV21 or SAV22 module carriers |
Article Match
Confirm the complete 6DD2920-0BB0 suffix and LES1 designation.
Carrier Compatibility
Match SAV1, SAV21 or SAV22 carrier hardware before installation.
Connection Mapping
Preserve the installed front-terminal numbering and cable assignment.
Product Overview
Siemens 6DD2920-0BB0 is the LES1 interface module for SIMADYN D carrier-based control hardware. The board provides the physical interface arrangement required by the installed system and presents labeled front connection points for field or cabinet wiring.
A correct replacement depends on the complete article number, LES1 module identity, carrier version and existing connection map. The module must be installed with the carrier supply disconnected and secured in the same configured position.
Key Functions
Carrier interface integration
Provides the LES1 interface function within compatible SIMADYN D module-carrier assemblies.
Labeled front connectivity
Organizes external connections at the module faceplate so the original cable map can be retained.
Service-visible status points
Provides front-accessible indicators and identified connection points for commissioning checks.
Official Specifications
| Equipment Classification | Open equipment |
|---|---|
| EMC Use Environment | Industrial environments conforming to EN 50081-2 and EN 50082-2 |
| Air Intake Temperature | 0 °C to +55 °C |
| Storage Temperature | −25 °C to +70 °C |
| Mechanical Severity in Operation | Class 12 according to SN 29050 |
| Mechanical Severity During Transport | Class 22 according to SN 29050 |
| EMC Certification | Manufacturer certification according to the EC Directive |
| CE Mark Status | SIMADYN D components are supplied without a CE mark |
| ESD Sensitivity | Electrostatic-sensitive electronics board |
Frequently Asked Questions
Which SIMADYN D carriers can accept 6DD2920-0BB0?
The LES1 interface module is intended for the SAV1, SAV21 and SAV22 carrier assemblies.
Must power be isolated before handling 6DD2920-0BB0?
Yes. Switch off the rack supply before inserting, removing or rewiring the module.
What wiring information should be recorded before replacing 6DD2920-0BB0?
Record the slot, carrier type, front connector assignments, cable destinations and the status indication of the installed unit.
What cabinet temperature condition applies to 6DD2920-0BB0?
Keep the cooling-air inlet at or below +55 °C and maintain the specified airflow through the rack.
Which EMC environment is specified for 6DD2920-0BB0?
The documented industrial immunity and emission references include EN 50081-2 and EN 50082-2.
What mechanical verification is required when installing 6DD2920-0BB0?
Confirm the correct carrier slot, secure seating and the installation requirements associated with mechanical severity classes 12 and 22.
Which front-panel checks should follow installation of 6DD2920-0BB0?
Verify all X-series connections and confirm the expected status indications before returning the system to operation.
