Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens ppm 1u32 bpf bacnet ms tp digital point pickup module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens PPM-1U32.BPF BACnet MS/TP Digital Point Pickup Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
Siemens Building Automation PPM

PPM-1U32.BPF BACnet MS/TP Digital Point Pickup Module

Six-point digital PPM with one universal input, three dry-contact inputs, two relay outputs and fixed terminal blocks.

At a Glance

Brand Siemens
Model PPM-1U32.BPF
Product Type BACnet expansion I/O controller
Core Function Remote building-system point acquisition and switching
Application BACnet building-controller point expansion

Distributed point acquisition

One universal input and three digital inputs collect remote building-system signals.

Relay output expansion

Two normally open relays switch the connected building-control loads.

BACnet network startup

DIP switches set the network address and communication rate, while device name and device ID are automatically populated.

Product Overview

PPM-1U32.BPF extends a building controller’s point count through a BACnet MS/TP network.

The fixed-terminal digital model combines a thermistor-or-contact universal input, pulse-capable digital inputs and relay outputs in an enclosed module with DIP-switch network setup.

Ordering focus: Match the BACnet MS/TP host, fixed-terminal format, sensor type and AC-powered relay-load circuits.
Key Functions

Distributed point acquisition

One universal input and three digital inputs collect remote building-system signals.

Relay output expansion

Two normally open relays switch the connected building-control loads.

BACnet network startup

DIP switches set the network address and communication rate, while device name and device ID are automatically populated.

Official Specifications
Power supply range 19.2–28.8 V AC; 50/60 Hz; Class 2 source
Family power consumption 4–7 VA
Universal input 1; 10 kΩ Type II NTC thermistor or dry contact
Digital inputs 3; dry contact or pulse accumulator
Digital outputs 2 Form A normally open relays
Relay contact ratings 24–240 V AC; 5 A resistive or 2 A general-purpose load
Terminal format Fixed terminal blocks
Network interface RS485 BACnet MS/TP; master or slave
Communication rates 9600, 19200, 38400 or 76800 baud; default 19200
Address selection 8-bit DIP switch
Analog conversion resource 12-bit A/D for supported analog sensing
Operating ambient 0 to +50°C
Storage ambient −40 to +70°C
Relative humidity 5–95%, non-condensing
Dimensions 154 × 114.4 × 34.5 mm
Maximum packaged weight 0.8 lb including box
Mounting options Electrical junction box, DIN rail or surface mounting
Local indicators Power, communication and digital-output LEDs
Frequently Asked Questions

Can I connect a 0–10 V transmitter to the universal input of PPM-1U32.BPF?

The universal input on this six-point digital model accepts a 10 kΩ Type II NTC thermistor or a dry contact rather than a 0–10 V signal.

Can I use local Hand-Off-Auto switches on PPM-1U32.BPF during checkout?

The BPF model has fixed terminals without the Hand-Off-Auto switches provided on the BPR digital version.

Can the three dedicated inputs of PPM-1U32.BPF count dry-contact pulses?

The three digital inputs can be used as dry-contact inputs or pulse accumulators.

Does PPM-1U32.BPF need a 24 V DC supply like many industrial I/O modules?

The module requires a Class 2 AC source in the 19.2–28.8 V range at 50 or 60 Hz.

Which network speed is active by default on PPM-1U32.BPF?

The default communication rate is 19200 baud, with 9600, 38400 and 76800 baud also selectable by DIP switch.

Do I need removable field terminal blocks when ordering PPM-1U32.BPF?

This BPF order number uses fixed terminal blocks.

Can PPM-1U32.BPF resume communication automatically after a power interruption?

The module recovers and resumes network communication after power returns without operator intervention.

Compatibility & Ordering Notes
Before ordering PPM-1U32.BPF: Match the BACnet MS/TP host, fixed-terminal format, sensor type and AC-powered relay-load circuits.

Before installation

  • Use the MS/TP version with a compatible BACnet building controller and set a suitable unique network address.
  • Match the fixed-terminal digital variant and the thermistor or contact input types.
  • Provide a Class 2 AC source and keep relay loads within the appropriate resistive or general-purpose rating.
  • Set the baud rate by DIP switch and use the specified wiring and mounting arrangement with power disconnected.
Hot Selling Models
PSSuEF2DOR8
4-TWIN 3211771
NLSAKSR2_10.01
88092387 873 15D7820 42024 250HP
J7KNA-09-10
2.5/14-ST-5.08
R5/4.2 R5/4.2A 202042
VHEF-LT-M32-M-G18
U539 0-100V
IFL 4-120-10ZPK
201-718-608
Bi20-CK40-AP6X2-H1141
DM435 7DM435.7
G1501S
1783-US5T

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.