EN
Siemens TELEPERM XP FUM 210 Function Module 6DP1210-8BC FUM210,6DP1210-8BC
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · TELEPERM XP
FUM210,6DP1210-8BC TELEPERM XP FUM 210 Function Module 6DP1210-8BC
The FUM210 with article number 6DP1210-8BC is a TELEPERM XP function module selected by the combined device designation and exact hardware version.
At a Glance
| Brand | Siemens |
|---|---|
| Model | FUM210,6DP1210-8BC |
| Product Type | Legacy process-control function module |
| Core Function | Executes the configured FUM 210 control and signal-processing functions in a TELEPERM XP system |
| Application or Compatible Series | TELEPERM XP installations that specify the FUM210 designation with article number 6DP1210-8BC |
Exact Identification
Match FUM210,6DP1210-8BC character by character and confirm the complete TELEPERM XP FUM 210 Function Module 6DP1210-8BC designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The FUM210 with article number 6DP1210-8BC is a TELEPERM XP function module selected by the combined device designation and exact hardware version.
Both the FUM210 designation and the full article number identify the required module. The module operates in the documented TELEPERM XP hardware arrangement. Plant-specific data and proof tests must remain aligned.
Key Functions
Combined Identification
Both the FUM210 designation and the full article number identify the required module.
Legacy Rack Integration
The module operates in the documented TELEPERM XP hardware arrangement.
Controlled Commissioning
Plant-specific data and proof tests must remain aligned.
Official Specifications
| System Family | TELEPERM XP |
|---|---|
| Module Designation | FUM210 |
| Article Number | 6DP1210-8BC |
| Component Type | Function module |
| Hardware Execution | -8BC |
| Installation | TELEPERM XP rack |
| Configuration | Plant-specific engineering data |
| Signal Assignment | Project-defined |
| Service Handling | ESD-controlled exchange |
| Commissioning | Authorized plant functional test |
Frequently Asked Questions
Why are both identifiers used for function module FUM210,6DP1210-8BC?
The function designation and article number together prevent selection of the wrong TELEPERM XP execution.
Which information should be copied before removing function module FUM210,6DP1210-8BC?
Record the rack slot, connector mapping, configured function, parameters and related module assignments.
Which installed configuration should be recorded before replacing function module FUM210,6DP1210-8BC?
Record the configured addresses, wiring assignments, parameters, firmware and neighboring hardware before removal.
What identification must match when selecting function module FUM210,6DP1210-8BC?
Match the complete article number, hardware revision and every option used by the installed system.
How should technicians handle function module FUM210,6DP1210-8BC?
Isolate the affected equipment and use grounded electrostatic-discharge precautions throughout the exchange.
Which checks are required after installing function module FUM210,6DP1210-8BC?
Verify power, diagnostics, communication, field signals and the complete approved machine or plant function.
When should a visually similar unit replace function module FUM210,6DP1210-8BC?
Use a visually similar unit only after engineering confirms identical electrical, mechanical and software compatibility.
Compatibility & Ordering Notes
Compatibility Checklist
- Use only where the TELEPERM XP project specifies the -8BC execution.
- Keep the combined identification unchanged in maintenance records.
- Validate the process function before return to service.
