Siemens ET 200PA SMART 6ES7650-8PB00-0AA0 RWB IM-IM Bus Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7650-8PB00-0AA0 RWB IM-IM redundant bus module
Official Siemens identification and technical data for 6ES7650-8PB00-0AA0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7650-8PB00-0AA0 |
|---|---|
| Manufacturer | Siemens |
| Platform | ET 200PA SMART |
| Product Type | RWB IM-IM redundant bus module |
| Country of Origin | Confirm on nameplate |
Exact Identification
Match the complete Siemens article number 6ES7650-8PB00-0AA0 and the photographed hardware revision.
Official Configuration
Designed to hold two IM 650-8PH interface modules.
Configuration Check
Verify ratings, terminals, system compatibility and revision before replacement.
Product Overview
6ES7650-8PB00-0AA0 is officially identified by Siemens as ET 200PA SMART RWB IM-IM bus module for mounting two IM 650-8PH interface modules in a redundant station configuration.
The complete article number 6ES7650-8PB00-0AA0 should be matched against the installed hardware, nameplate and official project documentation. Similar products can differ in electrical ratings, interfaces, terminal design, packing quantity or approved system use.
Key Functions
Model-Specific Configuration
6ES7650-8PB00-0AA0: Designed to hold two IM 650-8PH interface modules.
System Interface
6ES7650-8PB00-0AA0: Supports the redundant ET 200PA SMART interface arrangement documented by Siemens.
Replacement Control
6ES7650-8PB00-0AA0: The 0AA0 variant is the standard version; verify the exact suffix against any coated variant requirement.
Official Specifications
| Manufacturer | Siemens |
|---|---|
| Series | ET 200PA SMART |
| Article Number | 6ES7650-8PB00-0AA0 |
| Product Type | RWB IM-IM redundant bus module |
| Product Type | RWB IM-IM bus module |
| System | ET 200PA SMART |
| Interface Module Positions | 2 |
| Compatible Interface | IM 650-8PH |
| Configuration | Redundant interface arrangement |
| Variant | Standard 0AA0 version |
| Country of Origin | Confirm on nameplate |
Frequently Asked Questions
Which redundant ET 200PA SMART configuration supports 6ES7650-8PB00-0AA0?
Both IM 650 interface modules are installed on the active BM IM/IM for redundant operation with a CPU 410-5H or CPU 410 SMART.
How many interface modules can be mounted on 6ES7650-8PB00-0AA0?
The active bus module provides positions for two IM 650-8PH interface modules.
How should 6ES7650-8PB00-0AA0 be installed on the mounting rail?
Install the active bus module only while de-energized. Hook its lower edge into the rail, press it onto the rail, and slide it left until it reaches the latched position.
Where should 6ES7650-8PB00-0AA0 be positioned on a 530 mm mounting rail?
Using the right-hand snap-in position leaves space on the left for either two PS 307 2 A power supplies or one PS 307 5 A power supply.
What should technicians check before replacing an IM 650 mounted on 6ES7650-8PB00-0AA0?
Identify whether the interface module is active or passive, de-energize the unit being replaced, and follow the documented wiring and bus-connector removal sequence. In a redundant station, the passive interface module can be replaced without initiating a changeover.
Which redundancy setting must be avoided when using 6ES7650-8PB00-0AA0?
Do not activate the SYNC/FREEZE function in redundant mode, because Siemens excludes it from the supported redundant configuration.
How can installers identify the correct interface-module positions on 6ES7650-8PB00-0AA0?
The active BM IM/IM carries a yellow identification marking. These marked positions are reserved for IM 650 interface modules.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7650-8PB00-0AA0
- Match the complete article number 6ES7650-8PB00-0AA0 without shortening the suffix.
- Confirm the installed ET 200PA SMART system and hardware revision.
- Verify: Designed to hold two IM 650-8PH interface modules.
- Confirm included terminals, connectors and accessories in the written quotation.