Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 7uf7000 1ab00 0 simocode pro c motor management basic unit-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 7UF7000-1AB00-0 SIMOCODE pro C Motor Management Basic Unit

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMOCODE pro C

7UF7000-1AB00-0 SIMOCODE pro C Motor Management Basic Unit

A 24 V DC SIMOCODE pro C basic-unit arrangement with configurable digital I/O, monostable relay outputs, a thermistor input and PROFIBUS DP communication up to 12 Mbit/s.

At a Glance

Brand Siemens
Model 7UF7000-1AB00-0
Product Type Motor management and control basic unit
Core Function Coordinating motor protection, control and diagnostics
Application Compatible PROFIBUS motor-feeder assemblies

Configurable control I/O

Four digital inputs and three monostable relay outputs serve the motor control circuit.

PROFIBUS connection

The RS-485 interface provides a 9-pin socket and a separate screw-terminal connection with different speed limits.

Thermistor evaluation

The dedicated sensor input evaluates the motor thermistor circuit.

Product Overview

7UF7000-1AB00-0 provides the control and communication functions of a SIMOCODE pro C motor-feeder assembly.

A separately selected current measuring module supports current-based protection and monitoring, while the basic unit supplies the configurable control I/O, thermistor evaluation and PROFIBUS diagnostics.

Ordering focus: Select the 24 V DC control supply, a compatible current measuring module and the PROFIBUS connection appropriate to the required bus speed.
Key Functions

Coordinate motor-feeder control

The control functions include direct starting, reversing starting, circuit-breaker control and configurable overload-relay operation.

Evaluate motor and field signals

The unit combines four configurable digital inputs with thermistor evaluation, and the appropriate current module enables current-based overload, asymmetry and phase-failure functions.

Exchange commands and diagnostics

PROFIBUS DP provides bus communication and diagnostic data, using the selected RS-485 connection and its corresponding transmission-rate limit.

Official Specifications
Control Supply 24 V DC nominal; permissible operating factor 0.8–1.2 × rated voltage
Consumed Active Power 2.3 W
Supply Inrush 14 A peak for 0.8 ms at 24 V
Power-Failure Buffering Time 0.05 s
Digital Input Bank 4 inputs with common reference potential; 24 V DC; Type 1 according to EN 61131-2
Output Bank 3 configurable monostable relay outputs
Relay AC-15 Switching Current 6 A at 24 V or 120 V AC; 3 A at 230 V AC
Relay DC-13 Switching Current 2 A at 24 V DC; 0.55 A at 60 V DC; 0.25 A at 125 V DC
Relay Continuous Current 6 A at 50 °C; 5 A at 60 °C
Typical Relay Endurance 10 million mechanical operations; 100000 electrical operations
Thermistor Evaluation Thresholds Maximum total cold resistance: 1.5 kΩ; response: 3400–3800 Ω; release: 1500–1650 Ω; short-circuit control: 9 Ω
PROFIBUS Electrical Connections 9-pin SUB-D socket up to 12 Mbit/s; screw-terminal connection up to 1.5 Mbit/s
Maximum Digital-Signal Cable Length 300 m
Maximum Thermistor Cable Length 50 m with 0.5 mm² conductors; 150 m with 1.5 mm²; 250 m with 2.5 mm²
Control-Terminal Connection Removable screw terminals; tightening torque 0.8–1.2 Nm
Control Conductor Cross-Sections Solid: 1 × 0.5–4 mm² or 2 × 0.5–2.5 mm²; finely stranded with end processing: 1 × 0.5–2.5 mm² or 2 × 0.5–1.5 mm²
Dimensions 45 × 111 × 95 mm (W × H × D)
Ambient Temperature Operation: −25 to +60 °C; storage and transport: −40 to +80 °C
Required Clearances 40 mm above and below; 0 mm to either side
Net Weight 281.5 g
Official source:Siemens Product Data Sheet
Frequently Asked Questions

Does 7UF7000-1AB00-0 measure motor current through the basic unit itself?

The basic unit uses a compatible separate current measuring module for current-based functions.

Can I connect an analog temperature sensor to 7UF7000-1AB00-0?

The basic unit provides a thermistor input but does not accept analog temperature sensors.

Can 7UF7000-1AB00-0 join a PROFINET IO network directly?

This arrangement communicates over PROFIBUS DP and does not provide a PROFINET IO interface.

Which PROFIBUS connection on 7UF7000-1AB00-0 should I use for 12 Mbit/s?

Use the 9-pin SUB-D socket because the screw-terminal bus connection is limited to 1.5 Mbit/s.

Can the control supply of 7UF7000-1AB00-0 be connected to 230 V AC?

This supply variant requires 24 V DC with an operating range of 0.8 to 1.2 times the rated voltage.

Can I select a star-delta starter function on 7UF7000-1AB00-0?

The pro C control functions include direct and reversing starting but do not include a star-delta circuit.

How much free space should I leave around 7UF7000-1AB00-0 in the cabinet?

Allow 40 mm above and below the unit, while no additional side clearance is required.

Compatibility & Ordering Notes
Before ordering 7UF7000-1AB00-0: Match the 24 V DC basic-unit arrangement, the current measuring module, the required motor-control function and the PROFIBUS wiring method before completing the feeder assembly.

Compatibility Checklist for 7UF7000-1AB00-0

  • Use the 24 V DC supply variant within its permitted operating range.
  • Select a compatible current measuring module for current-based motor protection.
  • Choose the 9-pin bus socket for rates above 1.5 Mbit/s.
  • Use the thermistor input for the corresponding sensor circuit, rather than an analog temperature sensor.
  • Select direct or reversing starting as required; the pro C arrangement does not provide star-delta control.
  • Allow the stated cabinet clearances and apply the terminal torque and cable-length limits.
Hot Selling Models
3114.024 13077
NH-C00 9389 35A 500V NH-C00
9919-1800
SS-10C-MM-EP-1 M57232001
SMT-8M-A-PS-24V-E-12-M12
3RV1901-1A
D-U207
FSM 469 455 44
SME-8M-...-LED-24
CXF4/8
3RT1026-3BB40 3RT1926-1BB00
FR2-152 1004992
PSE-KRT02032 04-01-032
TS002E SIG -TS002E
3095764

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.