Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 7mf1567 3cb10 1aa1 sitrans p220 0 16 bar pressure transmitter-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 7MF1567-3CB10-1AA1 SITRANS P220 0–16 bar Pressure Transmitter

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITRANS P220 pressure measurement

7MF1567-3CB10-1AA1 SITRANS P220 0–16 bar Pressure Transmitter

A fully welded stainless-steel P220 transmitter for 0–16 bar gauge pressure, with 0–10 V three-wire output and a G½ male process connection.

At a Glance

Brand Siemens
Model 7MF1567-3CB10-1AA1
Product Type Welded pressure transmitter
Core Function Convert process pressure to an analog signal
Application Gauge-pressure measurement of liquids and gases

Welded pressure measurement

The stainless-steel diaphragm transfers process pressure to a piezoresistive measuring cell in a fully welded construction.

Voltage-output integration

A linearly rising 0–10 V signal connects to a receiving input with a load resistance of at least 10 kΩ.

Industrial process connection

The G½ male process connection follows EN837-1 and the electrical connection uses the Form A plug with M16 cable entry.

Product Overview

7MF1567-3CB10-1AA1 measures gauge pressure over a 0–16 bar range using a stainless-steel piezoresistive measuring cell.

This configuration provides a 0–10 V three-wire output, a 12–33 V DC supply range and a DIN EN175301-803-A electrical connector with an M16 cable entry.

Ordering focus: Match the 0–16 bar gauge range, 0–10 V controller input, G½ process thread and non-Ex installation requirement.
Key Functions

Welded pressure measurement

The stainless-steel diaphragm transfers process pressure to a piezoresistive measuring cell in a fully welded construction.

Voltage-output integration

A linearly rising 0–10 V signal connects to a receiving input with a load resistance of at least 10 kΩ.

Industrial process connection

The G½ male process connection follows EN837-1 and the electrical connection uses the Form A plug with M16 cable entry.

Official Specifications
Calibrated measuring range 0–16 bar gauge
Overload limits −1 to +40 bar
Burst pressure 96 bar
Output and wiring 0–10 V DC, three-wire
Supply voltage 12–33 V DC
Minimum output load resistance 10 kΩ
Supply current at 10 kΩ load Less than 7 mA
Typical and maximum measuring error 0.25% and 0.5% of span, including hysteresis and reproducibility
Step response T99 Less than 5 ms
Long-term stability 0.25% of span per year
Process-temperature range −40 to +120 °C
Ambient-temperature range −25 to +85 °C
Storage-temperature range −50 to +100 °C
Measuring-cell material Stainless steel 1.4016
Process-connection and housing material Stainless steel 1.4404 (316L)
Process thread G½ male to EN837-1
Electrical connection DIN EN175301-803-A Form A, M16 cable entry
Ingress protection IP65 with the specified Form A connector
Explosion-protection configuration Without explosion protection
Approximate mass 0.090 kg
Frequently Asked Questions

Can I connect 7MF1567-3CB10-1AA1 to a 4–20 mA analog input?

This version provides a three-wire 0–10 V voltage signal and requires a compatible voltage input.

Does 7MF1567-3CB10-1AA1 measure absolute pressure?

The selected measuring range is 0–16 bar gauge pressure.

Which DC supply should I use for 7MF1567-3CB10-1AA1?

Provide a DC supply between 12 and 33 V.

What input impedance is needed by the controller connected to 7MF1567-3CB10-1AA1?

The receiving load resistance must be at least 10 kΩ.

Which process adapter mates with 7MF1567-3CB10-1AA1?

Use a matching connection for the G½ male thread to EN837-1.

Can I use 7MF1567-3CB10-1AA1 as the Ex-protected version in a hazardous installation?

This order configuration is supplied without explosion protection.

Can 7MF1567-3CB10-1AA1 follow a fast pressure step?

The specified T99 step response is less than 5 ms.

Compatibility & Ordering Notes
Before ordering 7MF1567-3CB10-1AA1: Match the 0–16 bar gauge range, 0–10 V controller input, G½ process thread and non-Ex installation requirement.

Before installation

  • Use a 0–10 V controller channel with at least 10 kΩ receiving resistance.
  • Match the G½ EN837-1 process connection and the medium to the stainless-steel wetted parts.
  • Provide 12–33 V DC and wire the three-wire voltage-output circuit.
  • Use the specified Form A connector to complete the IP65 assembly; this configuration is not the Ex-protected version.
Hot Selling Models
3RV2011-0FA15
3RM1201-1AA04
R1083X16XX
5ST3624
ABB S402M-UCC16 + SK400
4EP3200-1US
PSR-SCP-24UC/ESM4/3X1/1X2/B
285-157
875R25D 72114 143 88006821
3SE3120-1J
3SE3120-0J
GV2M22
GV2ME21 034321
DPNC-80
008-443

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.