Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6sl3210 1pe18 0ul1 sinamics pm240 2 power module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6SL3210-1PE18-0UL1 SINAMICS PM240-2 Power Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SINAMICS G120

6SL3210-1PE18-0UL1 SINAMICS PM240-2 Power Module

FSA power module with 3.0 kW low-overload and 2.2 kW high-overload ratings for 380–480 V three-phase systems.

At a Glance

Brand Siemens
Model 6SL3210-1PE18-0UL1
Product Type Variable-frequency drive power stage
Core Function Conversion of mains power to a controlled motor output
Application Modular G120 drive assemblies

Duty-based motor sizing

Separate low-overload and high-overload ratings allow the power stage to be selected against continuous motor current and short peak loads.

Compact power connections

Plug-in screw terminals accept the line and motor conductors in a 73 mm wide FSA module.

Air-cooled energy conversion

The power stage has 96% efficiency and an internal cooling-air requirement of 0.005 m³/s.

Product Overview

6SL3210-1PE18-0UL1 supplies the power conversion stage for a modular SINAMICS G120 drive, with duty-dependent ratings for a three-phase industrial motor.

The module provides 7.70 A in low-overload duty or 5.90 A in high-overload duty, and fits an air-cooled FSA housing with plug-in power terminals.

Ordering focus: Use the 3.0 kW low-overload or 2.2 kW high-overload rating appropriate to the motor load, and include 0.12 kW of power loss in the cabinet heat calculation.
Key Functions

Duty-based motor sizing

Separate low-overload and high-overload ratings allow the power stage to be selected against continuous motor current and short peak loads.

Compact power connections

Plug-in screw terminals accept the line and motor conductors in a 73 mm wide FSA module.

Air-cooled energy conversion

The power stage has 96% efficiency and an internal cooling-air requirement of 0.005 m³/s.

Official Specifications
Mains voltage and frequency 3 AC 380–480 V ±10%; 47–63 Hz
Input current by duty 10.10 A low overload; 8.80 A high overload
Rated output power 3.00 kW low overload; 2.20 kW high overload
Rated output current 7.70 A low overload; 5.90 A high overload
Peak output current 11.80 A maximum
Switching frequency 4 kHz
Motor frequency ranges 0–200 Hz vector; 0–550 Hz V/f
Low-overload capability 110% for 57 s and 150% for 3 s in a 300 s cycle
High-overload capability 150% for 57 s and 200% for 3 s in a 300 s cycle
Efficiency 96%
Power loss 0.12 kW
Cooling-air requirement 0.005 m³/s
Rated installation altitude 1000 m
Duty temperature limits −10 to +40°C low overload; −10 to +50°C high overload
Storage and transport ambient −25 to +55°C
Maximum relative humidity 95%, without condensation
Line and motor conductors 1.5–2.5 mm², AWG 16–14
Maximum motor cable length 50 m shielded; 100 m unshielded
Degree of protection IP20 / UL open type
Frame, size and mass FSA; 73 × 196 × 165 mm (W × H × D); 1.40 kg
Frequently Asked Questions

Which continuous currents should I compare with the motor when selecting 6SL3210-1PE18-0UL1?

Compare the motor duty with the 7.70 A low-overload rating or the 5.90 A high-overload rating.

How much heat does 6SL3210-1PE18-0UL1 add at its specified operating point?

The stated power loss is 0.12 kW and must be included in the drive enclosure cooling calculation.

What conductor sizes fit the line and motor plugs on 6SL3210-1PE18-0UL1?

Both power connections accept conductors from 1.5 to 2.5 mm², equivalent to AWG 16–14.

How should I allow for a 3-second peak demand on 6SL3210-1PE18-0UL1?

The low-overload profile allows 150% for 3 s and the high-overload profile allows 200% for 3 s within the specified 300 s cycle.

Can I install 6SL3210-1PE18-0UL1 in a condensing environment?

The operating environment may reach 95% relative humidity but must remain free of condensation.

How wide is 6SL3210-1PE18-0UL1 when allocating space for a modular drive?

The FSA module is 73 mm wide, 196 mm high and 165 mm deep.

What cooling airflow must remain available around 6SL3210-1PE18-0UL1?

The internal air-cooling system requires an airflow of 0.005 m³/s.

Compatibility & Ordering Notes
Before ordering 6SL3210-1PE18-0UL1: Use the 3.0 kW low-overload or 2.2 kW high-overload rating appropriate to the motor load, and include 0.12 kW of power loss in the cabinet heat calculation.

Before installation

  • Select the G120 control unit and motor against the required continuous-current and overload profile.
  • Use the 380–480 V three-phase supply with the permitted ±10% voltage tolerance.
  • Plan for 0.12 kW heat loss and the specified cooling airflow in the enclosure.
  • Observe the motor-cable length, altitude and duty-specific ambient-temperature limits.
Hot Selling Models
R49G-3GK-RMG
PS-230AC/24DC/2.5
114030K12M120
31174000A
3SB3804-4EB
B&R X20HB8880
32-F4-B-SI
CDQ2B20-30DCM
8WD4408-0AB
AY10AY11
60.13.8.024.0020
31008
6FX1111-1AA01
1734-Entr PN-138004
5SX2 106-7

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.