Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6se7090 0xx84 2fa0 simovert masterdrives pmu operating unit-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6SE7090-0XX84-2FA0 SIMOVERT MASTERDRIVES PMU Operating Unit

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMOVERT MASTERDRIVES

6SE7090-0XX84-2FA0 SIMOVERT MASTERDRIVES PMU Operating Unit

A PMU operating and parameterizing unit assigned to MASTERDRIVES design A and B devices, with local display and keypad access.

At a Glance

Brand Siemens
Model 6SE7090-0XX84-2FA0
Product Type Local operating and parameterizing unit
Core Function Entering parameters and viewing drive information
Application MASTERDRIVES design A and B devices

Local parameter entry

The toggle, raise and lower keys navigate and edit parameter information.

Four-digit display

The seven-segment display presents drive states, faults and parameter data.

Configured drive commands

ON, OFF and reverse controls operate within the drive’s configured command assignments.

Product Overview

6SE7090-0XX84-2FA0 provides the PMU operating and parameterizing interface for the corresponding SIMOVERT MASTERDRIVES design A and B devices.

The local keypad supports direct parameter selection and adjustment, while the display presents drive states, alarms and faults without requiring a separate handheld panel for these basic tasks.

Ordering focus: Select the PMU assigned to the design A or B host device and retain the drive’s existing parameter-access and command settings.
Key Functions

Navigate parameter levels

The toggle key cycles through parameter number, index and value, skipping the index level for parameters that are not indexed.

Edit settings locally

The raise and lower keys change the displayed setting one step at a time or rapidly when held.

Return to operating information

Toggle-key combinations provide direct access to the operating display and the previously selected parameter number.

Official Specifications
Display Format Four-digit seven-segment display
Keypad Controls ON, OFF, reversing, toggle, raise and lower
Displayable Information Drive status, alarms and faults, parameter numbers, parameter indices, and parameter values.
Parameter Display Sequence Parameter number → parameter index (for indexed parameters) → parameter value; non-indexed parameters go directly from number to value.
P (Toggle) Key Switches between parameter display levels and acknowledges an active fault display.
Raise Key A short press increases the displayed value by one increment; holding the key increases it rapidly.
Lower Key A short press decreases the displayed value by one increment; holding the key decreases it rapidly.
Reversing Key Reverses drive rotation when enabled by parameters P571 and P572.
Frequently Asked Questions

Is 6SE7090-0XX84-2FA0 assigned to design A and B MASTERDRIVES devices?

The PMU spare-part assignment covers the corresponding design A and B devices.

What setting permits local parameter changes through 6SE7090-0XX84-2FA0?

Parameter P053 controls parameter access, with the PMU enabled when the relevant access bit is set.

Why does 6SE7090-0XX84-2FA0 sometimes skip the parameter-index level?

A parameter without an index is selected directly from its number to its value.

How can I speed up value adjustment on 6SE7090-0XX84-2FA0?

Hold the raise or lower key to change the displayed value rapidly.

Can 6SE7090-0XX84-2FA0 switch between the operating display and the last selected parameter?

At parameter-number level, hold the toggle key and press the raise key to switch between the last parameter number and operating display r000.

How can I bring a fault display back while using 6SE7090-0XX84-2FA0?

Press the ON key when a fault is present to return to the fault display.

Does the OFF key on 6SE7090-0XX84-2FA0 always use the same stopping action?

The OFF key uses OFF1, OFF2 or OFF3 according to the drive’s command parameterization.

Compatibility & Ordering Notes
Before ordering 6SE7090-0XX84-2FA0: Match the PMU to the design A or B host device and retain the required local-access and drive-command parameterization.

Compatibility Checklist for 6SE7090-0XX84-2FA0

  • Use the design A and B spare-part assignment.
  • Retain the required P053 parameter-access setting.
  • Preserve the configured OFF1, OFF2 and OFF3 command behavior.
  • Treat the PMU as the local operator component rather than the drive power section.
Hot Selling Models
6ES7223-1PH21-0XA0 223-1PH21-0XA0
SL200100
KFU8-FSSP-1.D Y180599
ABB S273 K10A
Protect-PE-02
6ED10521HA000BA0
170BDM34600
VUVG-B18-M52-MZT-F-1R8L
0060D020 BH4HC/-V
R412007396 AS3-SOV-B038-3/2
CCB01-010BT-V7N-IN
BCC00N7 C-506-PU-05
Norgren 0880393
DFA4001BNUL
VSVA-B-P53E-H-A2-1C1

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.