Siemens 6SE7090-0XX84-0FF5 SIMOVERT MASTERDRIVES CBP2 PROFIBUS Communication Board
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the complete CBP2 order number and host drive.
- Allow for the internal 5 V supply requirement.
- Use the correct X448 data pins and shield connection.
- Enable termination only at the line ends.
- Check connector clearance and optical-link restrictions for the drive construction.
6SE7090-0XX84-0FF5 SIMOVERT MASTERDRIVES CBP2 PROFIBUS Communication Board
A CBP2 communication board with an isolated nine-pin PROFIBUS interface and transfer rates up to 12 Mbaud.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SE7090-0XX84-0FF5 |
| Product Type | Drive communication option board |
| Core Function | Exchanging drive data over PROFIBUS |
| Application | MASTERDRIVES Motion Control systems |
PROFIBUS connection
The X448 female D-sub interface provides the RS485 bus connection.
Host-powered board
The basic drive supplies the board from its internal 5 V rail.
Three status LEDs
Red, yellow and green indicators distinguish board, host and bus activity.
Product Overview
6SE7090-0XX84-0FF5 links a SIMOVERT MASTERDRIVES drive to a PROFIBUS automation network. The CBP2 option exchanges drive data through the isolated X448 interface and supports transfer rates up to 12 Mbaud.
The front-panel indicators separately show board operation, data exchange with the basic unit and useful PROFIBUS data traffic. Bus termination is provided in the PROFIBUS connector, so the first and last nodes require the terminating resistors to be enabled.
Key Functions
Exchange drive telegrams
The communication board links the drive to the PROFIBUS system through RS485.
Provide an isolated bus interface
X448 separates the bus connection and provides an isolated supply for bus termination or an optical link plug.
Separate communication checks
Three LEDs identify board operation, communication with the drive and PROFIBUS data transfer.
Official Specifications
| Bus interface | X448, isolated 9-pin female D-sub, RS485 |
|---|---|
| Maximum data-transfer rate | 12 Mbaud |
| Internal supply requirement | 5 V ±5%, maximum 600 mA from the basic unit |
| Isolated X448 pin 6 supply | 5 V ±10%, maximum 100 mA |
| Board dimensions | 90 × 83 mm (length × width) |
| Cooling method | Natural-air cooling |
| Operating temperature | 0 to +70 °C |
| Storage and transport temperature | −25 to +70 °C |
| Permitted operating humidity | Up to 85% relative humidity, non-condensing |
| Permitted storage and transport humidity | Up to 95% relative humidity |
| Climatic class | 3K3 according to DIN IEC 721-3-3 |
| Pollution degree | 2 according to IEC 664-1 |
| Status indicators | Red: board operation; yellow: host data exchange; green: PROFIBUS useful data |
| Maximum CBP boards per drive | 2 |
| Stationary vibration resistance | 0.15 mm at 10–58 Hz; 19.6 m/s² above 58–500 Hz |
| Transport vibration resistance | 3.5 mm at 5–9 Hz; 9.8 m/s² above 9–500 Hz |
Frequently Asked Questions
Where should bus termination be enabled when installing 6SE7090-0XX84-0FF5?
Enable the terminating resistors in the PROFIBUS connectors at the first and last nodes of the line.
Which X448 pins carry the RS485 data on 6SE7090-0XX84-0FF5?
Pin 3 carries the positive B signal and pin 8 carries the negative A signal.
Should the three LEDs on 6SE7090-0XX84-0FF5 remain continuously lit in normal operation?
Normal operation is indicated by all three LEDs repeatedly flashing together for the same duration.
Can I use a 90-degree PROFIBUS connector in Compact-unit slots E or G with 6SE7090-0XX84-0FF5?
A 90-degree PROFIBUS connector must not be inserted in slots E or G on Compact units.
Can an optical link plug be used on Compact units types 1 and 2 with 6SE7090-0XX84-0FF5?
Optical link plugs cannot be used on those units because of the available space.
How many CBP boards can a drive accommodate when using 6SE7090-0XX84-0FF5?
A basic drive can accommodate two CBP boards.
Does 6SE7090-0XX84-0FF5 require a separate external supply for the board electronics?
The board electronics receive 5 V internally from the basic drive.