Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6se7090 0xx84 0ad1 masterdrives mc cumc control unit-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMOVERT MASTERDRIVES MC CUMC Control Unit 6SE7090-0XX84-0AD1

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMOVERT MASTERDRIVES Motion Control

6SE7090-0XX84-0AD1 SIMOVERT MASTERDRIVES MC CUMC Control Unit

The Siemens CUMC control unit is the Motion Control board used in compatible SIMOVERT MASTERDRIVES MC compact and chassis drive units.

At a Glance

Brand Siemens
Model 6SE7090-0XX84-0AD1
Product Type CUMC motion-control board for compact and chassis drive units
Core Function Executes drive control, motion-control functions, I/O processing and serial communication for compatible MASTERDRIVES MC units
Application or Compatible Series SIMOVERT MASTERDRIVES MC compact and chassis converters using the CUMC control-unit generation

Exact Identification

Match the full article number and confirm that the installed drive uses the CUMC generation.

Drive Parameters

Back up the complete drive parameter set, board configuration and communication addresses before exchange.

Connector Assignment

Preserve the X300 and X103 serial wiring together with all control-terminal and option-board assignments.

Product Overview

The Siemens CUMC control unit is the Motion Control board used in compatible SIMOVERT MASTERDRIVES MC compact and chassis drive units.

The CUMC board provides the control architecture for the original MASTERDRIVES MC compact and chassis generation. Standard connections include RS232 or RS485 service communication, an RS485 USS bus and digital or analog control terminals. The board configuration routine initializes supported communication, sensor and SIMOLINK option boards for the installed drive.

Ordering focus: confirm the complete article number, CUMC hardware generation, drive-unit format, firmware, parameter backup, encoder feedback, option boards and connector assignments.
Key Functions

Motion-Control Processing

The CUMC board provides the control architecture for the original MASTERDRIVES MC compact and chassis generation.

Integrated Control Interfaces

Standard connections include RS232 or RS485 service communication, an RS485 USS bus and digital or analog control terminals.

Configurable Expansion

The board configuration routine initializes supported communication, sensor and SIMOLINK option boards for the installed drive.

Official Specifications
Control Unit Designation CUMC — Control Unit Motion Control
Board Identification Code 93
Drive Unit Format SIMOVERT MASTERDRIVES MC compact and chassis units
Main Processor Generation C167 at 20 MHz
Analog Input Resolution 9 bit plus sign
Service Interface X300 9-pole SUB-D for RS232 or RS485 communication with a PC or OP1S
USS Interface SCom1 RS485 on X103 terminals 27 and 28
USS Interface SCom2 RS485 on X103 terminals 25 and 26
Positive Potentiometer Supply +10 V ±1.3%; maximum 5 mA
Negative Potentiometer Supply -10 V ±1.3%; maximum 5 mA
X300 Auxiliary Output +5 V; maximum 200 mA
Software Update Signal Boot input on X300; low-active digital signal
Bus Termination Switchable termination for SCom1 and SCom2
Control Terminal Conductor Size 0.14 to 1.5 mm²; AWG 16 maximum
Option-Board Configuration Board configuration initializes supported CBx communication boards and the SLB SIMOLINK interface
Frequently Asked Questions

Which drive family accepts 6SE7090-0XX84-0AD1?

It belongs to compatible SIMOVERT MASTERDRIVES MC compact and chassis units built around the CUMC control generation.

What should be backed up before replacing 6SE7090-0XX84-0AD1?

Save the complete parameter set, board configuration, motor data, encoder settings and communication addresses.

How can a PC or OP1S connect to 6SE7090-0XX84-0AD1?

Use the X300 nine-pole service socket with the required RS232 or RS485 wiring and bus termination.

Which USS connections are available on 6SE7090-0XX84-0AD1?

Two RS485 channels are provided as SCom1 and SCom2 on the X103 control terminal strip.

What must be checked when option boards are fitted to 6SE7090-0XX84-0AD1?

Confirm every installed board type, slot, address and board-configuration parameter before starting the drive.

Can 6SE7090-0XX84-0AD1 be exchanged directly with a CUPM board?

The generations differ in processor, memory and certain signal behavior, so a planned migration and parameter review are required.

Why should the encoder setup be verified after installing 6SE7090-0XX84-0AD1?

An incorrect encoder or feedback configuration can prevent correct closed-loop operation and safe axis commissioning.

Compatibility & Ordering Notes
Before ordering 6SE7090-0XX84-0AD1: confirm the complete article number, CUMC hardware generation, drive-unit format, firmware, parameter backup, encoder feedback, option boards and connector assignments.

Compatibility Checklist

  • Confirm the converter is a SIMOVERT MASTERDRIVES MC compact or chassis unit designed for the CUMC generation.
  • Match every installed communication, sensor and SIMOLINK option board to the saved board configuration.
  • Restore and verify drive parameters, encoder data, I/O assignments and USS addresses before enabling the axis.
Hot Selling Models
3RU1126-1JB0
Festo 533344
SD-93G32 A 240/415
MZ202
RF100 Gly 85217801
6ES7390-0AA00-0AA0
FAZ-B16/3 FAZ-XHIN11
CAD32 CAD32P7
FU77V
NZ2VZ-538HE-M
ABB C564 1SAR330010R0002
3NA3 005
46.52.9.024.0040 99.02.9.024.99
MK31-11-LU
NECU-G78G4-C2

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.