Siemens SIMATIC RF600 6GT2811-6BC10-2AA0 RF610R RFID Reader
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC RF600
6GT2811-6BC10-2AA0 RF610R CMIIT UHF RFID Reader
Siemens 6GT2811-6BC10-2AA0 is the SIMATIC RF610R CMIIT UHF RFID reader with an integrated antenna, industrial Ethernet and PROFINET connectivity, IP67 protection and a one-metre maximum reading range.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GT2811-6BC10-2AA0 |
| Product Type | Industrial UHF RFID reader with integrated antenna |
| Core Function | Reads and writes passive UHF tags over industrial Ethernet |
| Application or Compatible Series | SIMATIC Ident RF600 systems approved for the CMIIT band |
Regional Variant
Use the CMIIT variant only where its 920.625 to 924.375 MHz radio approval applies.
Read-Zone Setup
Set the transmit power and mounting position to cover the required tag path without unwanted reads.
Network Commissioning
Assign the Ethernet or PROFINET identity and verify the controller or host communication path.
Product Overview
Siemens 6GT2811-6BC10-2AA0 is the SIMATIC RF610R CMIIT UHF RFID reader with an integrated antenna, industrial Ethernet and PROFINET connectivity, IP67 protection and a one-metre maximum reading range.
The internal antenna creates a compact read point without a separate RF cable or antenna. Ethernet, PROFINET, TCP/IP and OPC UA options integrate identification data with automation systems. A browser interface supports configuration and diagnostic work from a connected service computer.
Key Functions
Integrated UHF Antenna
The internal antenna creates a compact read point without a separate RF cable or antenna.
Industrial Network Access
Ethernet, PROFINET, TCP/IP and OPC UA options integrate identification data with automation systems.
Web-Based Service
A browser interface supports configuration and diagnostic work from a connected service computer.
Official Specifications
| CMIIT Operating Frequency | 920.625 to 924.375 MHz |
|---|---|
| Adjustable Transmit Power | 3 to 400 mW |
| Maximum CMIIT Radiated Power | 250 mW ERP |
| Maximum Range with Internal Antenna | 1 m |
| Air-Interface Protocol | ISO 18000-62 and ISO 18000-63 |
| Maximum Transmission Speed | 300 kbit/s |
| Frequency Accuracy | ±10 ppm maximum |
| CMIIT Channel Spacing | 250 kHz |
| Modulation and Encoding | DSB-ASK or PR-ASK with Manchester or PIE |
| Typical Write Time per Byte | 2 ms |
| Typical Read Time per Byte | 0.15 ms |
| Supply Voltage | 24 V DC, 20 to 30 V DC permitted |
| Maximum Current Consumption | 0.3 A |
| Dimensions | 140.5 x 133 x 45 mm |
| Weight | 370 g |
| Mounting Pattern | VESA 100 with four M4 screws |
| Tightening Torque for Mounting Screws | 1.5 N·m |
| Status Indication | 6 LEDs |
| Degree of Protection | IP67 |
| Antenna Polarization | Circular |
Frequently Asked Questions
Where can I legally operate 6GT2811-6BC10-2AA0?
Use the reader only in locations covered by the CMIIT radio approval and its assigned UHF band.
How far can 6GT2811-6BC10-2AA0 read a compatible tag?
The internal antenna provides a maximum specified range of one metre under suitable installation conditions.
How should I reduce unwanted reads around 6GT2811-6BC10-2AA0?
Lower the transmit power and adjust reader position, tag orientation and shielding around the intended read zone.
Which tag air interface works with 6GT2811-6BC10-2AA0?
Use passive UHF transponders that support ISO 18000-62 or ISO 18000-63.
Can 6GT2811-6BC10-2AA0 be mounted in a washdown-area enclosure?
The reader itself is rated IP67 when installed with correctly sealed connections and accessories.
What network settings must be restored after replacing 6GT2811-6BC10-2AA0?
Restore the device name, IP configuration, controller assignment and application communication parameters.
How should I mechanically mount 6GT2811-6BC10-2AA0?
Use the VESA 100 pattern with four M4 screws tightened to the specified torque.
Compatibility & Ordering Notes
Compatibility Checklist
- Use only the CMIIT radio variant in the authorized 920.625 to 924.375 MHz region.
- Confirm the selected tags support the reader air-interface protocols and fit the required read-zone geometry.
- Preserve the Ethernet or PROFINET identity, application commands, transmit power and mounting orientation.