Siemens 6GT2002-0AB00 MOBY I CM 422 Channel Module for ASM 400
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the CM 422 channel family for an ASM 400 configuration with FB 250.
- Do not mix CM 422 and CM 423 channel modules in one base assembly.
- Switch off the PLC and the 24 V supply before fitting or removing modules.
- Secure the channel module to the metal front panel for EMC-compatible operation.
6GT2002-0AB00 MOBY I CM 422 Channel Module for ASM 400
An RS422 channel module that equips an ASM 400 base module for MOBY I read/write communication.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GT2002-0AB00 |
| Product Type | Identification channel module |
| Core Function | Exchanging mobile data-carrier information |
| Application | SIMATIC S5 identification stations |
Extend the ASM 400
One to four CM 422 channel modules can be installed in the base assembly.
Communicate with the read/write device
The SLG connection uses an RS422 interface through a 9-pin D-sub socket.
Identify channel status
Red, yellow and green LEDs provide fault, communication and data-carrier presence indications.
Product Overview
6GT2002-0AB00 adds a MOBY I channel to the ASM 400 interface assembly.
The modular arrangement supports expansion of the base assembly with one to four CM 422 channels and uses FB 250 for absolute addressing of data-carrier memory.
Key Functions
Extend the ASM 400
One to four CM 422 channel modules can be installed in the base assembly.
Communicate with the read/write device
The SLG connection uses an RS422 interface through a 9-pin D-sub socket.
Identify channel status
Red, yellow and green LEDs provide fault, communication and data-carrier presence indications.
Official Specifications
| SLG Electrical Interface | RS422 |
|---|---|
| Channel Connector | 9-pin D-sub female socket |
| Data-Carrier Transfer Rate | 19,200 baud |
| Transmission Format | Asynchronous, 8 data bits and even parity |
| Channel Indicators | Red fault LED, yellow communication LED and green presence LED |
| Transmit Pair | Pin 2: positive; pin 6: negative |
| Receive Pair | Pin 3: positive; pin 5: negative |
| Ground and Supply Pins | Pin 7: 0 V; pin 8: +24 V |
Frequently Asked Questions
Can I mix 6GT2002-0AB00 with CM 423 modules in one base assembly?
CM 422 and CM 423 channel modules cannot be mixed in the same base module.
Which function block should my S5 program use with 6GT2002-0AB00?
The ASM 400 configuration uses FB 250 with absolute data-carrier addressing.
How many 6GT2002-0AB00 channel modules can an ASM 400 hold?
The base assembly accepts one to four CM 422 channel modules.
Must power be switched off before installing 6GT2002-0AB00?
Switch off the PLC and the 24 V supply before inserting or removing a channel module.
What does the yellow LED on 6GT2002-0AB00 indicate?
Rapid irregular flashing indicates communication with the SLG or mobile data carrier, while continuous illumination is used with presence monitoring.
Why is the green LED on 6GT2002-0AB00 inactive when FB 250 is running?
The green data-carrier presence indicator operates only when presence monitoring is enabled with FB 250.
What should I check before an online test through 6GT2002-0AB00?
Channel 1 must be populated and terminals 1 and 2 at X20 on the base module must be bridged for the STG 4F online test.