EN
Siemens SIMATIC NET CP 443-5 Basic PROFIBUS Processor 6GK7443-5FX02-0XE0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC NET S7-400
6GK7443-5FX02-0XE0 SIMATIC NET CP 443-5 Basic PROFIBUS Processor
The CP 443-5 Basic provides a 9-pin RS485 PROFIBUS interface for S7-400 communication at rates up to 12 Mbit/s.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK7443-5FX02-0XE0 |
| Product Type | S7-400 PROFIBUS communication processor |
| Core Function | Connects an S7-400 rack to PROFIBUS for FMS, S5-compatible, PG/OP and S7 communication |
| Application or Compatible Series | SIMATIC S7-400 systems requiring a CP 443-5 Basic master communication module |
Exact Identification
Match 6GK7443-5FX02-0XE0 character by character and confirm the complete SIMATIC NET CP 443-5 Basic PROFIBUS Processor designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The CP 443-5 Basic provides a 9-pin RS485 PROFIBUS interface for S7-400 communication at rates up to 12 Mbit/s.
The processor adds fieldbus communication to an S7-400 station. FMS, S5-compatible, PG/OP and S7 services support established systems. The CP position, bus address and connector termination must match the STEP 7 project.
Key Functions
Dedicated PROFIBUS Connectivity
The processor adds fieldbus communication to an S7-400 station.
Multiple Siemens Services
FMS, S5-compatible, PG/OP and S7 services support established systems.
Exact Rack Integration
The CP position, bus address and connector termination must match the STEP 7 project.
Official Specifications
| PROFIBUS Rate | 9.6 kbit/s to 12 Mbit/s |
|---|---|
| PROFIBUS Interfaces | 1 |
| Connector | 9-pin Sub-D socket |
| Physical Layer | RS485 |
| FMS Communication | Supported |
| S5-Compatible Communication | Supported |
| PG/OP Communication | Supported |
| S7 Communication | Supported |
| Industrial Ethernet Interfaces | 0 |
| Backplane Supply | 5 V DC |
| External Supply | 24 V DC |
| Typical Backplane Current | 1 A |
| Typical External Current | 1.2 A |
| Typical Power Loss | 5 W |
Frequently Asked Questions
What should an engineer verify about profibus rate before replacing 6GK7443-5FX02-0XE0?
Confirm 9.6 kbit/s to 12 Mbit/s and compare it with the installed hardware, wiring and saved configuration before removal.
How should profibus interfaces be matched when commissioning 6GK7443-5FX02-0XE0?
Use 1, then retain the matching interface, project and parameter settings during commissioning.
Is 6GK7443-5FX02-0XE0 suitable when the project requires the stated connector?
It supports 9-pin Sub-D socket; the complete system must also meet the electrical, mechanical and engineering requirements.
What installation check applies to physical layer on 6GK7443-5FX02-0XE0?
Verify RS485, complete the associated wiring or configuration checks and record the result before startup.
Can 6GK7443-5FX02-0XE0 be substituted without confirming fms communication?
No. Confirm Supported together with the connector arrangement and project settings before approving a replacement.
Why does s5-compatible communication matter when integrating 6GK7443-5FX02-0XE0?
The required condition is Supported; a mismatch can prevent communication, correct control or safe operation.
What should be tested for pg/op communication after installing 6GK7443-5FX02-0XE0?
Test operation with Supported, review diagnostics and complete the required functional and safety checks before service.
Compatibility & Ordering Notes
Compatibility Checklist
- Match profibus rate (9.6 kbit/s to 12 Mbit/s) to the installed system.
- Verify profibus interfaces (1) before changing wiring or configuration.
- Back up all available project, parameter and network data, then complete the required functional and safety checks.
