Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6gk1503 2cb00 profibus olm g11 v4 optical link-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens PROFIBUS OLM/G11 V4.0 6GK1503-2CB00 Optical Link Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC NET PROFIBUS

6GK1503-2CB00 OLM/G11 V4.0 Optical Link Module

Siemens 6GK1503-2CB00 is the PROFIBUS OLM/G11 V4.0 optical link module with one RS485 electrical interface and one duplex multimode glass-fiber channel using two BFOC sockets.

At a Glance

Brand Siemens
Model 6GK1503-2CB00
Product Type PROFIBUS electrical-to-optical link module
Core Function Couples an RS485 PROFIBUS segment to a multimode glass-fiber channel
Application or Compatible Series Optical PROFIBUS and PROFIBUS PA networks

Fiber Selection

Use 50/125 µm or 62.5/125 µm multimode glass fiber within the documented attenuation budget.

Bus Timing

Include the optical propagation delay when calculating the PROFIBUS network timing and segment length.

Power and Alarm

Wire the 24 V supply, redundant input and signaling contact before commissioning.

Product Overview

Siemens 6GK1503-2CB00 is the PROFIBUS OLM/G11 V4.0 optical link module with one RS485 electrical interface and one duplex multimode glass-fiber channel using two BFOC sockets.

The module converts one electrical PROFIBUS segment to a duplex optical channel. Glass-fiber segments up to 3 km are supported with the specified fibers and optical budgets. Integrated optical ring redundancy supports fault-tolerant PROFIBUS topologies.

Ordering focus: match the electrical bus rate, multimode fiber type, BFOC connectors, optical attenuation budget, 24 V supply and signaling-contact wiring.
Key Functions

Electrical-to-Optical Conversion

The module converts one electrical PROFIBUS segment to a duplex optical channel.

Long Multimode Links

Glass-fiber segments up to 3 km are supported with the specified fibers and optical budgets.

Ring Redundancy

Integrated optical ring redundancy supports fault-tolerant PROFIBUS topologies.

Official Specifications
PROFIBUS Transfer Range 9.6 kbit/s to 12 Mbit/s
PROFIBUS PA Transfer Rate 45.45 kbit/s
Electrical Network Connection One 9-pin Sub-D socket
Measurement Connection One 2-pole terminal block
Power and Signaling Connection One 5-pole terminal block
Optical Channel One duplex channel using two BFOC sockets
Maximum Attenuation with 50/125 µm Fiber 10 dB
Maximum Attenuation with 62.5/125 µm Fiber 12 dB
Propagation Delay 6.5 bit times
Connectable Optical Power -16 dB for 50/125 µm and -13 dB for 62.5/125 µm fiber
Optical Sensitivity -28 dB
Optical Wavelength 860 nm multimode
Maximum Fiber Length 3 km
Signaling-Contact Rating 24 V DC at 0.1 A maximum
Rated Supply Voltage 24 V DC
Permitted Supply Range 18.8 to 28.8 V DC
Maximum Current Consumption 0.2 A at 24 V DC
Operating Temperature 0 to 60 °C
Degree of Protection IP40
Dimensions and Weight 39.5 x 112 x 74.5 mm; 340 g
Frequently Asked Questions

Which fiber types can I use with 6GK1503-2CB00?

Use supported 50/125-micrometre or 62.5/125-micrometre multimode glass fiber with BFOC connectors.

What is the longest optical segment for 6GK1503-2CB00?

A correctly engineered multimode segment can extend to three kilometres within the permitted attenuation budget.

Can 6GK1503-2CB00 operate at normal PROFIBUS DP speeds?

Yes, it supports rates from 9.6 kilobits per second through 12 megabits per second.

How is an alarm wired from 6GK1503-2CB00?

Use the signaling-contact terminals and keep the connected load within the twenty-four-volt, 0.1-ampere rating.

Does 6GK1503-2CB00 support a redundant optical ring?

Yes, the optical link module includes ring-redundancy operation for supported topologies.

Where can 6GK1503-2CB00 be installed mechanically?

The compact housing can be mounted on a 35 mm DIN rail or on a wall.

Which optical values must be compared before replacing 6GK1503-2CB00?

Compare fiber core size, wavelength, attenuation budget, connector type and configured transmission rate.

Compatibility & Ordering Notes
Before ordering 6GK1503-2CB00: match the electrical bus rate, multimode fiber type, BFOC connectors, optical attenuation budget, 24 V supply and signaling-contact wiring.

Compatibility Checklist

  • Confirm that both fiber ends use the supported multimode glass-fiber construction and BFOC connectors.
  • Include the 6.5-bit optical delay in the PROFIBUS timing calculation.
  • Check the 24 V supply polarity and alarm-contact load before applying power.
Hot Selling Models
VUVS-L20-M32C-AD-G18-F7
4000-68113-0000000
140M-C2E-C20
ZK103162511020
3RU1136-4AB0
18-3UL
PNOZ13S/1Ö
AA-911-30 25-116-21
DLC1D09
CDQ2B40TF15DCZ
Q-FSMA-KT-6-ESD
E441
3RV2011-1EA10
X20 BR 9300
4000-68000-1610000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.