EN
Siemens Absolute Encoder Singleturn 24-bit DRIVE-CLiQ Hollow Shaft 12 mm 6FX2001-5WD13-1AA0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens • Motion Control Encoder Measuring Systems
6FX2001-5WD13-1AA0 Absolute Encoder Singleturn 24-bit DRIVE-CLiQ Hollow Shaft 12 mm
The Siemens absolute encoder is a 24-bit singleturn feedback device with DRIVE-CLiQ communication, a radial M12 connection and a 12 mm hollow shaft for industrial motion-control applications.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6FX2001-5WD13-1AA0 |
| Product Type | Singleturn absolute encoder with hollow shaft |
| Core Function | Provides 24-bit absolute position feedback through DRIVE-CLiQ |
| Application or Compatible Series | Motion-control drives using DRIVE-CLiQ and a 12 mm hollow-shaft coupling |
Exact Identification
Match 6FX2001-5WD13-1AA0 character by character and confirm the complete Absolute Encoder Singleturn 24-bit DRIVE-CLiQ Hollow Shaft 12 mm designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The Siemens absolute encoder is a 24-bit singleturn feedback device with DRIVE-CLiQ communication, a radial M12 connection and a 12 mm hollow shaft for industrial motion-control applications.
A 24-bit singleturn code provides precise absolute position information for servo and motion tasks. The radial M12 interface connects directly to compatible Siemens drive electronics over a cable run of up to 100 m. The encoder supports high rotational speed, industrial vibration and IP67 housing protection.
Key Functions
High-Resolution Position Feedback
A 24-bit singleturn code provides precise absolute position information for servo and motion tasks.
Integrated DRIVE-CLiQ Communication
The radial M12 interface connects directly to compatible Siemens drive electronics over a cable run of up to 100 m.
Rugged Mechanical Design
The encoder supports high rotational speed, industrial vibration and IP67 housing protection.
Official Specifications
| Operating Voltage | 24 V DC ±20% |
|---|---|
| Typical Current Consumption | 37 mA |
| Communication Interface | DRIVE-CLiQ |
| Absolute Resolution | 24 bit |
| Incremental Track | 2048 S/R, 1 Vpp; encoder-internal only |
| Connection | Radial M12 DRIVE-CLiQ connector |
| Maximum Cable Length | 100 m |
| Maximum Electrical Speed | 14,000 rpm |
| Maximum Mechanical Speed | 15,000 rpm |
| Hollow Shaft Diameter | 12 mm |
| Shaft Length | 24 mm |
| Maximum Angular Acceleration | 100,000 rad/s² |
| Housing Protection | IP67 |
| Shaft-Input Protection | IP64 |
| Operating Temperature | -30 to 100 °C |
| Maximum Shaft Load at ≤6,000 rpm | 40 N axial / 60 N radial |
| Net Weight | 0.35 kg |
Frequently Asked Questions
Which drive interface is required for 6FX2001-5WD13-1AA0?
Use a compatible DRIVE-CLiQ port and the approved radial M12 connection.
What shaft must be matched when installing 6FX2001-5WD13-1AA0?
The mechanical coupling must fit the 12 mm hollow shaft without exceeding the permitted shaft loads.
How long can the feedback cable be for 6FX2001-5WD13-1AA0?
Keep the connection to the downstream electronics within the published 100 m limit.
Can 6FX2001-5WD13-1AA0 operate above 14,000 rpm?
The electrical limit is 14,000 rpm even though the mechanical design is rated up to 15,000 rpm.
What should be checked before replacing 6FX2001-5WD13-1AA0?
Confirm the shaft geometry, mounting orientation, connector direction, cable route and drive feedback configuration.
How should 6FX2001-5WD13-1AA0 be protected during installation?
Prevent impact, contamination and excessive axial or radial loading while preserving the specified enclosure protection.
What commissioning check is important for 6FX2001-5WD13-1AA0?
Verify the absolute position, rotation direction, encoder identification and stable feedback throughout the required speed range.
Compatibility & Ordering Notes
Compatibility Checklist
- Use only with a compatible DRIVE-CLiQ encoder interface.
- Match the 12 mm hollow shaft and mechanical mounting arrangement.
- Keep the cable and shaft loads within the published limits.
