EN
Siemens WF 726C Positioning Module V1.7 6FM1726-3CA10
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · WF 725 / WF 726
6FM1726-3CA10 WF 726C Positioning Module V1.7
The WF 726C is a positioning module for special-machine automation with interfaces for drive control and incremental or serial absolute position encoders.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6FM1726-3CA10 |
| Product Type | WF 726C positioning module |
| Core Function | Processes motion-positioning tasks with incremental or serial absolute measuring systems |
| Application or Compatible Series | SIMATIC-based special-machine positioning systems using WF 726C hardware interfaces |
Exact Identification
Match 6FM1726-3CA10 character by character and confirm the complete WF 726C Positioning Module V1.7 designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The WF 726C is a positioning module for special-machine automation with interfaces for drive control and incremental or serial absolute position encoders.
Dedicated connectors support incremental and serial absolute measuring systems. The module generates an internally derived ±10 V command signal for the connected drive controller. The WF 726C occupies one standard slot and does not require a fan row.
Key Functions
Flexible Encoder Feedback
Dedicated connectors support incremental and serial absolute measuring systems.
Analog Drive Command
The module generates an internally derived ±10 V command signal for the connected drive controller.
Compact SIMATIC Installation
The WF 726C occupies one standard slot and does not require a fan row.
Official Specifications
| Module Version | WF 726C V1.7 |
|---|---|
| Internal Logic Supply | 5 V DC ±5% from SIMATIC |
| Internal Current at 5 V | 1.3 A excluding encoder |
| Encoder Supply Capacity | 0.3 A maximum per encoder |
| Encoder Input Current | 10 mA |
| Command-Output Range | ±10 V |
| Maximum Command-Output Current | 2 mA |
| External I/O Supply | 24 V DC ±5% |
| 24 V Input Current | 5 mA |
| 24 V Output Current | 0.4 A |
| Encoder Input Limit Frequency | 200 kHz before quadrupling |
| Serial Transmission Rate | 1 MHz |
| SIMATIC Rack Space | 1 standard slot |
| Fan Row Requirement | Not required |
| Encoder Interface Options | Incremental and serial absolute |
Frequently Asked Questions
Which feedback systems can be wired to 6FM1726-3CA10?
It supports incremental encoders and serial absolute encoders through the designated connectors.
How much SIMATIC 5 V current should be reserved for 6FM1726-3CA10?
Allow 1.3 A for the module itself and include the connected encoder load in the power balance.
What analog drive command is available from 6FM1726-3CA10?
The drive interface provides an internally generated ±10 V command output.
Is a fan row required below 6FM1726-3CA10?
No, this module version does not require a fan row.
What encoder input frequency can 6FM1726-3CA10?
The documented limit is 200 kHz before signal quadrupling.
Which connector assignments need confirmation on 6FM1726-3CA10?
Verify the X3 through X7 interface functions and the matching Siemens cable assemblies.
What must be preserved before replacing 6FM1726-3CA10?
Record axis parameters, encoder type, drive scaling, connector wiring and firmware status.
Compatibility & Ordering Notes
Compatibility Checklist
- Use only with the documented WF 726C SIMATIC rack and power arrangement.
- Match each encoder and drive cable to its designated interface connector.
- Preserve axis machine data and encoder scaling before exchange.
