Siemens 6ES7963-2AA00-0AA0 SIMATIC S7-400 IF963-TTY Interface Submodule
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Check the CP 441 and IF963 hardware generations as a matched combination.
- Use a TTY current-loop partner and the specified D-sub connection.
- Choose the communication rate and cable distance together.
- Account for both the 5 V and 24 V current requirements of the submodule.
6ES7963-2AA00-0AA0 SIMATIC S7-400 IF963-TTY Interface Submodule
20 mA TTY interface for the earlier CP 441 interface generation, with rates up to 19.2 kbit/s and a 1000 m link at 9600 bit/s.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7963-2AA00-0AA0 |
| Product Type | Plug-in serial interface submodule |
| Core Function | TTY point-to-point signal conversion |
| Application | Compatible CP 441 communication processors |
TTY current-loop connection
The interface uses twenty-milliamp TTY signaling for point-to-point communication.
Long serial link
The specified maximum cable distance is 1000 m at 9600 bit/s.
Plug-in CP interface
The submodule provides the TTY connection for the corresponding CP 441 generation.
Product Overview
6ES7963-2AA00-0AA0 equips a compatible CP 441 communication processor with a TTY point-to-point interface.
The electrically isolated twenty-milliamp current-loop interface uses a nine-pin D-sub female connector and supports serial links up to 1000 m at the stated 9600 bit/s condition.
Key Functions
TTY current-loop connection
The interface uses twenty-milliamp TTY signaling for point-to-point communication.
Long serial link
The specified maximum cable distance is 1000 m at 9600 bit/s.
Plug-in CP interface
The submodule provides the TTY connection for the corresponding CP 441 generation.
Official Specifications
| Signal interface | 20 mA TTY current loop |
|---|---|
| Serial transmission range | 300 bit/s to 19.2 kbit/s |
| Maximum cable distance | 1000 m at 9600 bit/s |
| 5 V supply current | 100 mA maximum |
| 24 V supply current | 45 mA maximum |
| Typical power loss | 1.5 W |
| Front connector | 9-pin D-sub female with screw interlock |
| Electrical isolation | Provided |
| Enclosure protection | IP00 |
| Dimensions | 20 × 70 × 95 mm (W × H × D) |
| Approximate weight | 80 g |
Frequently Asked Questions
Which CP generation should I check before fitting 6ES7963-2AA00-0AA0?
Match the earlier CP 441 interface generation, including CP 441-xAA04, rather than the later xAA05 interface modules.
Can I connect an RS232 device directly to 6ES7963-2AA00-0AA0?
The field interface uses twenty-milliamp TTY current-loop signaling.
What transmission rate accompanies the 1000 m cable limit of 6ES7963-2AA00-0AA0?
The 1000 m maximum cable length applies at 9600 bit/s.
Can I run a slower serial partner from 6ES7963-2AA00-0AA0?
The specified transmission-rate range starts at 300 bit/s.
Which connector should I use for a cable to 6ES7963-2AA00-0AA0?
The cable must mate with the nine-pin D-sub female connector and its screw interlock.
How much thermal load does 6ES7963-2AA00-0AA0 add inside the host?
The typical power loss of the interface submodule is 1.5 W.
Are the TTY signals of 6ES7963-2AA00-0AA0 isolated from the host electronics?
The TTY interface provides electrical isolation.