Siemens 6ES7963-2AA00-0AA0 SIMATIC S7-400 IF963-TTY Interface Submodule
Fabricator: Siemens
Condición: Nuevo
Plazo de Entrega: En Stock
Origo: Germania
Garantía: 12 Meses
Inscriptio electronica: [email protected]
whatsapp: +86-18150117685
- Conspectus
- Hot Selling Models
- Producta commendata
Conspectus
- Check the CP 441 and IF963 hardware generations as a matched combination.
- Use a TTY current-loop partner and the specified D-sub connection.
- Choose the communication rate and cable distance together.
- Account for both the 5 V and 24 V current requirements of the submodule.
6ES7963-2AA00-0AA0 SIMATIC S7-400 IF963-TTY Interface Submodule
20 mA TTY interface for the earlier CP 441 interface generation, with data rates up to 19.2 kbit/s and a 1000 m link at 9600 bit/s.
Ad Primum Aspectum
| Nota | Siemens |
|---|---|
| Modellum | 6ES7963-2AA00-0AA0 |
| Typus Producti | Plug-in serial interface submodule |
| Functio principalis | TTY point-to-point signal conversion |
| Applicatio | Processores communicationis CP 441 compatibiles |
TTY current-loop connection
The interface uses twenty-milliampere TTY signaling for point-to-point communication.
Longa ligatio serialis
Distantia maxima specificata cavi est 1000 m ad 9600 bit/s.
Interfacs CP insertabile
Submodulus praebet connexionem TTY pro generatione CP 441 correspondente.
Product Overview
6ES7963-2AA00-0AA0 equipat processorem communicationis CP 441 compatibilem cum interfacs TTY punctum-ad-punctum.
Interfacs electricae isolationis vicesimae-milliampere currentis-loop utitur connexione D-sub feminea novem-pinis et sustinet ligationses seriales usque ad 1000 m ad conditionem 9600 bit/s declaratam.
Key Functions
TTY current-loop connection
The interface uses twenty-milliampere TTY signaling for point-to-point communication.
Longa ligatio serialis
Distantia maxima specificata cavi est 1000 m ad 9600 bit/s.
Interfacs CP insertabile
Submodulus praebet connexionem TTY pro generatione CP 441 correspondente.
Official Specifications
| Interfacing signale | 20 mA TTY currentis loop |
|---|---|
| Ammplitudo transmissionis serialis | 300 bit/s ad 19,2 kbit/s |
| Maxima Distantia Cavi | 1000 m ad 9600 bit/s |
| currente de alimentatione de 5 V | 100 mA maxime |
| currente de alimentatione de 24 V | maxime 45 mA |
| Perditio potentiæ typica | 1.5 W |
| Conector Anterior | d-sub femina de 9 pinnas con interblocco a viti |
| Isolatio Electrica | Praebitum |
| Protectio Inclusis | IP00 |
| Dimensiones | 20 × 70 × 95 mm (L × A × P) |
| Pondus Approximatum | 80 g |
Quaestiones Frequenter Rogatae
Quale generatione de CP devo verificare ante de montare le 6ES7963-2AA00-0AA0?
Corresponde al plure vetere generatione de interface CP 441, includente le CP 441-xAA04, non al plure recente module de interface xAA05.
Poteo io connexer un apparatu RS232 directemente al 6ES7963-2AA00-0AA0?
The field interface uses twenty-milliamp TTY current-loop signaling.
What transmission rate accompanies the 1000 m cable limit of 6ES7963-2AA00-0AA0?
The 1000 m maximum cable length applies at 9600 bit/s.
Can I run a slower serial partner from 6ES7963-2AA00-0AA0?
The specified transmission-rate range starts at 300 bit/s.
Which connector should I use for a cable to 6ES7963-2AA00-0AA0?
The cable must mate with the nine-pin D-sub female connector and its screw interlock.
How much thermal load does 6ES7963-2AA00-0AA0 add inside the host?
The typical power loss of the interface submodule is 1.5 W.
Are the TTY signals of 6ES7963-2AA00-0AA0 isolated from the host electronics?
The TTY interface provides electrical isolation.