Siemens SIMATIC S7-400 6ES7952-1KM00-0AA0 MC 952 4 MB Flash Memory Card
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm that the installed CPU accepts long-format MC 952 cards.
- Do not confuse the 1KM Flash card with the 1AM 4 MB RAM card.
- Confirm that 4 MB is sufficient for the complete load-memory requirement.
- Preserve a verified copy of the controller project before exchanging the card.
- Follow the CPU-specific card insertion, removal and memory-reset procedure.
- Allow for the specified 5 V current consumption and long-card clearance.
Siemens · SIMATIC S7-400
6ES7952-1KM00-0AA0 MC 952 4 MB Flash Memory Card
Siemens 6ES7952-1KM00-0AA0 is a long-format MC 952 memory card for SIMATIC S7-400 controllers, providing 4 MB of 5 V Flash EPROM storage without battery-buffer current.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7952-1KM00-0AA0 |
| Product Type | MC 952 PLC Memory Card |
| Core Function | Stores the controller program on removable nonvolatile media |
| Application or Compatible Series | SIMATIC S7-400 controllers |
Exact Memory Technology
Match the 1KM Flash EPROM article number rather than the similarly sized 1AM RAM version.
Capacity Match
Confirm that the archived controller project and CPU requirements fit the 4 MB card capacity.
Physical Fit
Check the long-format memory-card slot and insertion clearance in the installed S7-400 rack.
Product Overview
Siemens 6ES7952-1KM00-0AA0 is a long-format MC 952 memory card for SIMATIC S7-400 controllers, providing 4 MB of 5 V Flash EPROM storage without battery-buffer current.
Flash EPROM preserves programmed content without drawing a memory-card buffer current. The removable card provides 4 MB of storage for the configured controller program. The device uses the established 5 V long-format MC 952 mechanical design.
Key Functions
Nonvolatile Program Retention
Flash EPROM preserves programmed content without drawing a memory-card buffer current.
Four-Megabyte Load Memory
The removable card provides 4 MB of storage for the configured controller program.
S7-400 Long-Card Interface
The device uses the established 5 V long-format MC 952 mechanical design.
Official Specifications
| Storage Technology | Flash EPROM |
|---|---|
| Storage Capacity | 4 MB |
| Physical Design | Long format |
| Nominal Interface Voltage | 5 V |
| Typical Current Consumption at 5 V | 40 mA |
| Maximum Current Consumption at 5 V | 90 mA |
| Battery-Buffer Current | None required for the Flash version |
| Dimensions | 7.5 × 57 × 87 mm |
| EMC Protection | Provided through constructional design measures |
| M7-400 Usability | Identified as usable in M7-400 in Siemens CPU technical data |
Frequently Asked Questions
How much program storage does 6ES7952-1KM00-0AA0 provide?
The card provides 4 MB of Flash EPROM capacity.
Does 6ES7952-1KM00-0AA0 require battery current to retain its contents?
Flash storage retains its contents without a memory-card buffer current.
Which voltage does 6ES7952-1KM00-0AA0 use in the controller slot?
The card uses the 5 V memory-card interface.
How much current should I allow for 6ES7952-1KM00-0AA0?
Allow for 40 mA typically and 90 mA at maximum from the 5 V supply.
Can I replace a RAM card directly with 6ES7952-1KM00-0AA0?
Confirm the CPU procedure and project requirements because this item is Flash EPROM rather than battery-backed RAM.
What physical clearance is needed for 6ES7952-1KM00-0AA0?
The long-format card measures 7.5 × 57 × 87 mm.
What should I preserve before changing 6ES7952-1KM00-0AA0?
Keep a verified project archive and confirm the required card technology, capacity and target CPU compatibility before replacement.