Siemens 6ES7952-0KH00-0AA0 SIMATIC S7-400 MC 952 256 KB Memory Card
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the corresponding S7-400 memory-card slot.
- Include both program and system-data size in the 256 KB limit.
- Select the flash-card download workflow rather than a RAM-card workflow.
- Set the CPU to STOP before card exchange.
6ES7952-0KH00-0AA0 SIMATIC S7-400 MC 952 256 KB Memory Card
A long-design 256 KB, 5 V Flash-EPROM memory card for permanent user-program storage in an S7-400 CPU.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7952-0KH00-0AA0 |
| Product Type | MC 952 memory card |
| Core Function | Extending CPU load memory |
| Application | S7-400 CPUs with the corresponding card slot |
256 KB capacity
The card provides 256 KB of Flash-EPROM storage.
No backup supply
Flash contents remain stored when the card is outside the CPU or backup voltage is absent.
Program-load workflow
The complete program can be written through STEP 7 or with a suitable offline programming arrangement.
Product Overview
6ES7952-0KH00-0AA0 provides 256 KB of Flash-EPROM load-memory storage in the long-design MC 952 format for S7-400 CPUs.
The nonvolatile medium retains its stored program without backup voltage, while the CPU’s memory-card procedure determines how the program is loaded and how a replacement card is introduced.
Key Functions
Store the program without backup voltage
Flash storage preserves the programmed contents with power removed and while the card is outside the CPU.
Load a complete program image
The flash-card workflow reloads the complete user program, including the required system data.
Support planned card replacement
Card replacement uses the CPU STOP procedure and the applicable memory-reset and download sequence.
Official Specifications
| Memory Technology | Flash-EPROM |
|---|---|
| Storage Capacity | 256 KB |
| Nominal Card Voltage | 5 V |
| 5 V Current Consumption | 20 mA typical; 45 mA maximum |
| Backup Voltage for Stored Contents | Not required |
| Approximate Weight | 51 g |
Frequently Asked Questions
Will 6ES7952-0KH00-0AA0 lose its stored program when removed from the CPU?
The flash contents remain stored without backup voltage even outside the CPU.
Does 6ES7952-0KH00-0AA0 act as a RAM card for program editing in RUN?
This is a flash card, while the S7-400 card-selection guidance assigns program editing in RUN to RAM-card use.
How should I put a new program onto 6ES7952-0KH00-0AA0 through STEP 7?
With the CPU in STOP and the required memory reset completed, use the command to download the user program to the memory card.
Can 6ES7952-0KH00-0AA0 be programmed before it is inserted into the CPU?
A suitable programming device or programming adapter can load the flash card offline.
Can a major program update be copied to 6ES7952-0KH00-0AA0 one small section at a time?
Significant program changes require downloading the complete user program to the flash card.
What must I include when checking whether 6ES7952-0KH00-0AA0 is large enough?
Include the user program and system data in the required capacity.
Which CPU mode should I select before exchanging 6ES7952-0KH00-0AA0?
Set the CPU to STOP before changing the memory card.