Siemens 6ES7921-5AB20-0AA0 TOP connect 32 I/O Screw Front Connector
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Romania
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Retain the four L+ and four M supply assignment when assembling the wiring.
- Prepare 10 mm stripped ends and the appropriate 10 mm ferrules.
- Respect the 0.75 mm² maximum for plastic-collar ferrules.
- Apply 0.4–0.7 Nm to the supply screws and keep individual plug contacts within 1 A.
6ES7921-5AB20-0AA0 TOP connect 32 I/O Screw Front Connector
A 32 I/O front-connector module with four 16-pole IDC connections and screw terminals for the L+ and M potential supplies.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7921-5AB20-0AA0 |
| Product Type | Digital front-connector module |
| Core Function | System-cable termination of digital I/O |
| Application | S7-1500 control-panel wiring |
Four system plugs
Four 16-pole IDC interfaces connect the digital I/O system cables.
Screw-fed supply
Eight supply terminals provide four L+ and four M connection points.
Torque control
Tighten the supply screws to 0.4–0.7 Nm.
Product Overview
6ES7921-5AB20-0AA0 adapts a 40-pole S7-1500 front connection to four 16-pole IDC system-cable connections for 32 digital I/O channels. Its potential supplies use screw terminals rather than push-in terminals.
The eight top-mounted supply points comprise four L+ and four M connections. Wire preparation, conductor size and tightening torque need to suit these screw terminals, while the connected plug contacts remain subject to their individual current limits.
Key Functions
Distribute digital system cabling
Four 16-pole IDC interfaces connect the 32 I/O front-connector module to the TOP connect cable arrangement.
Terminate L+ and M supplies
Four L+ and four M screw terminals provide top-side access to the potential feeds.
Control supply-terminal assembly
Use a 3.5 mm screwdriver and a tightening torque of 0.4 to 0.7 Nm, with conductor preparation matched to the screw connection.
Official Specifications
| I/O and front-contact arrangement | 32 I/O; 40-pole module-side front connection |
|---|---|
| System-cable interfaces | 4 × 16-pole IDC connectors |
| Potential-feed terminals | 8 screw terminals: 4 × L+ and 4 × M |
| Rated and maximum DC voltage | 24 V DC rated; 60 V DC maximum |
| Plug-contact and total current | 1 A per plug contact; 2 A total with horizontal installation |
| Maximum system-cable length | 30 m between front connector and terminal module |
| Flexible conductor with ferrule | 0.25–1.5 mm²; maximum 0.75 mm² with a plastic-collar ferrule |
| Stranded or fine-stranded conductor without ferrule | 0.5–2.5 mm² |
| Strip length and ferrule length | 10 mm; ferrules to DIN 46228-1 or DIN 46228-4 |
| Maximum conductor insulation diameter | 3.1 mm |
| Supply-terminal tightening torque | 0.4–0.7 Nm |
| Screwdriver blade width | 3.5 mm |
| Overvoltage category and pollution degree | Category II; pollution degree 2 |
| Operating temperature | 0 to +60 °C |
| Storage temperature | −40 to +70 °C |
| Mounting and housing | Direct mounting; black housing |
| Net weight | 99 g |
Frequently Asked Questions
How many L+ feed points are available on 6ES7921-5AB20-0AA0?
The supply block has four L+ screw terminals and four M screw terminals.
What torque should I apply to the supply screws on 6ES7921-5AB20-0AA0?
Tighten the supply-terminal screws to between 0.4 and 0.7 Nm using a 3.5 mm screwdriver.
Can I fit a 1.5 mm² plastic-collar ferrule into 6ES7921-5AB20-0AA0?
Plastic-collar ferrules are limited to 0.75 mm² even though other permitted ferruled flexible conductors extend to 1.5 mm².
How should I prepare an unferruled flexible supply wire for 6ES7921-5AB20-0AA0?
Use a conductor from 0.5 to 2.5 mm² and strip 10 mm of insulation.
Can one IDC plug contact on 6ES7921-5AB20-0AA0 carry the whole 2 A total load?
Each plug contact is limited to 1 A, while the connector total is limited to 2 A with horizontal installation.
What system-cable ends do I need for 6ES7921-5AB20-0AA0?
The front-connector module provides four 16-pole IDC system-cable interfaces.
Can I place the terminal module 40 m from 6ES7921-5AB20-0AA0?
Keep the cable route between the front-connector module and terminal module within 30 m.