Siemens 6ES7650-1BD51-0XX0 SIMATIC ET 200M FET Switch Adapter
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use MTA 6ES7650-1AH51-5XX0 or 6ES7650-1AH50-5XX0.
- Match the 6ES7336-1HE00-0AB0 FAI module at E-Stand 4 or later.
- Install between J1 and the FAI interconnection cable.
- Secure the adapter screws against vibration and cable stress.
- Test the switching action when the FAI module is removed from service.
6ES7650-1BD51-0XX0 SIMATIC ET 200M FET Switch Adapter
An optically coupled FET switch adapter for the ET 200M six-channel FAI marshalled termination assembly.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7650-1BD51-0XX0 |
| Product Type | Marshalling connection accessory |
| Core Function | Decouples redundant analog input branches |
| Application | Six-channel fail-safe analog input MTA assemblies |
Branch isolation
Opens the signal path when the associated FAI module loses power.
FAI-derived power
The FAI module’s VS supply powers the electronic switches.
MTA connection
Installs between MTA connector J1 and the cable to the FAI module.
Product Overview
6ES7650-1BD51-0XX0 is the FET switch adapter for the ET 200M six-channel fail-safe analog-input marshalled termination arrangement.
Its optically coupled switches open the input-signal path and Mana when the associated FAI module loses power, separating the failed branch from the still-active measurement path.
Key Functions
Power-loss branch separation
The switches open if the FAI module or its power supply fails, removing that module’s electronics from the active signal circuit.
Controlled reintegration
When power returns, the switches close so the FAI module can reintegrate into the redundant arrangement.
Service-time switch testing
Test the switch adapter when the FAI module is removed from service to confirm that the switches operate correctly.
Official Specifications
| Switch technology | Optically coupled electronic FET switches |
|---|---|
| Operating power source | FAI module VS supply |
| VS current requirement | 25 mA |
| Operating temperature | −25 to +60 °C |
| Relative humidity | 5–95%, without condensation |
Frequently Asked Questions
Which marshalling assemblies accept 6ES7650-1BD51-0XX0?
The adapter is used on FAI MTAs 6ES7650-1AH51-5XX0 or 6ES7650-1AH50-5XX0.
Which fail-safe analog input module is associated with 6ES7650-1BD51-0XX0?
The arrangement interfaces to the six-channel 6ES7336-1HE00-0AB0 FAI module at E-Stand 4 or later.
Where is 6ES7650-1BD51-0XX0 installed in the signal path?
Install the adapter between connector J1 on the MTA and the interconnecting cable to the FAI module.
What happens to 6ES7650-1BD51-0XX0 when its FAI module loses power?
The electronic switches open the input-signal path and Mana to isolate the failed module’s electronics.
What powers the switches inside 6ES7650-1BD51-0XX0?
The associated FAI module’s VS supply powers the optically coupled electronic switches.
Is 6ES7650-1BD51-0XX0 interchangeable with 6ES7650-1BD50-0XX0?
The two FET switch adapter articles are interchangeable.
When should I test 6ES7650-1BD51-0XX0 during maintenance?
Test correct switch operation when the FAI module is removed from service.