EN
Siemens SIMATIC S7-1500R 6ES7515-2RM00-0AB0 CPU 1515R-2 PN
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Recommended Products
Overview
- Match the exact suffix and Siemens product family.
- Confirm the current project, firmware and hardware configuration.
- Verify power, communication, mounting and wiring requirements.
- Record settings and complete functional tests before production use.
6ES7515-2RM00-0AB0 CPU 1515R-2 PN redundant controller
Redundant CPU with 500 KB program memory, 3 MB data memory and two PROFINET interfaces for S7-1500R systems.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7515-2RM00-0AB0 |
| Product Type | CPU 1515R-2 PN redundant controller |
| Core Function | Executes redundant automation tasks with two PROFINET interfaces |
| Application / Compatible Series | SIMATIC S7-1500R redundant automation systems |
Product Overview
Siemens identifies this controller as a CPU 1515R-2 PN for redundant SIMATIC S7-1500R automation. It provides separate program and data work memory, two PROFINET interfaces and support for a SIMATIC Memory Card.
For replacement or system expansion, match the paired CPU configuration, firmware, memory card, PROFINET topology and STEP 7 hardware configuration before commissioning.
Key Functions
Redundant Control
Designed for paired operation in a SIMATIC S7-1500R system.
Integrated Networking
Provides one PROFINET RT interface with a 2-port switch and a second PROFINET interface.
Engineering and Memory
Uses STEP 7 in TIA Portal and requires a SIMATIC Memory Card.
Official Specifications
| Firmware Version | V2.9 |
|---|---|
| Program Work Memory | 500 KB |
| Data Work Memory | 3 MB |
| Maximum Load Memory | 32 GB |
| Maximum Retentive Data | 512 KB |
| PROFINET Interface 1 | PROFINET RT |
| Integrated Switch | 2 ports |
| PROFINET Interface 2 | Integrated |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 19.2 to 28.8 V DC |
| Rated Current Consumption | 0.8 A |
| Typical Power Loss | 6.3 W |
| Memory Card | SIMATIC Memory Card required |
| Engineering Software | STEP 7 in TIA Portal |
Frequently Asked Questions
How should two 6ES7515-2RM00-0AB0 CPUs be matched for redundant operation?
Use the same hardware configuration, compatible firmware and the redundancy settings defined in the TIA Portal project.
Which memory medium is required when commissioning 6ES7515-2RM00-0AB0?
A SIMATIC Memory Card is required for loading and operating the configured automation program.
What PROFINET topology checks are important for 6ES7515-2RM00-0AB0?
Confirm both interfaces, device names, IP settings, switch ports and the redundant system network layout before startup.
Can 6ES7515-2RM00-0AB0 be replaced without reloading the project?
The replacement procedure depends on the saved configuration and memory card; keep an approved project backup and follow the documented synchronization sequence.
What power checks are needed before installing 6ES7515-2RM00-0AB0?
Verify a stable 24 V DC supply within the permitted range, correct polarity, grounding and the current capacity of the control cabinet supply.
Which diagnostics should be reviewed after starting 6ES7515-2RM00-0AB0?
Check redundancy status, diagnostic buffer entries, PROFINET reachability, I/O status and synchronization before returning the process to service.
What engineering environment supports 6ES7515-2RM00-0AB0?
Configure the controller in STEP 7 within TIA Portal using a hardware catalog and firmware level that match the installed unit.
