EN
Siemens SIMATIC S7-400 CPU 416-3 6ES7416-3XL00-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-400 - Programmable logic controller CPU
6ES7416-3XL00-0AB0 SIMATIC S7-400 CPU 416-3
Siemens documents this CPU 416-3 with 3.2 MB work memory, an MPI/DP interface, a second PROFIBUS DP interface and a third interface for IFM modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7416-3XL00-0AB0 |
| Product Type | Programmable logic controller CPU |
| Core Function | High-capacity PLC processing with two PROFIBUS-capable interfaces and IFM expansion |
| Application or Compatible Series | SIMATIC S7-400 automation systems |
Product Overview
Siemens documents this CPU 416-3 with 3.2 MB work memory, an MPI/DP interface, a second PROFIBUS DP interface and a third interface for IFM modules.
Official Siemens documentation identifies the product for SIMATIC S7-400 automation systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Large Work Memory
Separate 1.6 MB code and 1.6 MB data areas support extensive S7-400 programs.
Multiple Bus Interfaces
MPI/DP, PROFIBUS DP and IFM connectivity support distributed automation structures.
Fast Instruction Processing
Bit, word and fixed-point operations are documented at 0.08 microseconds.
Official Specifications
| Firmware Version | V3.1 |
|---|---|
| Engineering Software | STEP 7 V5.2 or higher |
| Work Memory | 1.6 MB code and 1.6 MB data |
| Integrated Load Memory | 256 KB RAM |
| FLASH / RAM Card Capacity | Up to 64 MB |
| Bit / Word / Fixed-Point Operation Time | 0.08 µs each |
| Floating-Point Operation Time | 0.48 µs |
| Memory Markers | 16 KB |
| Data Blocks | Maximum 4,095; 64 KB each |
| S7 Counters / Timers | 512 each |
| Total I/O Address Area | 16 KB inputs / 16 KB outputs |
| Process Image | 16 KB inputs / 16 KB outputs |
| Digital / Analog Channels | 131,072 each / 8,192 each |
| Primary Interface | MPI/PROFIBUS DP, up to 12 Mbit/s |
| Additional Interfaces | PROFIBUS DP plus interface for IFM |
| Local Data | Maximum 32 KB |
Frequently Asked Questions
Which automation platform is 6ES7416-3XL00-0AB0 designed for?
This CPU is designed for the modular SIMATIC S7-400 automation system.
How much work memory is available in 6ES7416-3XL00-0AB0?
The CPU provides 3.2 MB of work memory, split evenly between code and data.
What is the primary bus interface on 6ES7416-3XL00-0AB0?
The first interface supports MPI or PROFIBUS DP communication at up to 12 Mbit/s.
Does 6ES7416-3XL00-0AB0 provide a separate PROFIBUS connection?
A second interface is dedicated to PROFIBUS DP communication.
What is the third interface position on 6ES7416-3XL00-0AB0 used for?
The third interface position accepts a compatible plug-in IFM interface module.
Which hardware and firmware combination identifies 6ES7416-3XL00-0AB0?
The identified version uses hardware revision 8 with firmware V3.1.3.
What should be matched before replacing 6ES7416-3XL00-0AB0 in a rack?
The S7-400 slot position, interface assignments, memory configuration and saved STEP 7 project should all match the installed CPU.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7416-3XL00-0AB0
- Match SIMATIC S7-400 CPU 416-3 and the full article number character by character.
- Verify engineering software: STEP 7 V5.2 or higher.
- Confirm bit / word / fixed-point operation time: 0.08 µs each.
- Preserve the approved settings and connection records used in SIMATIC S7-400 automation systems.
