EN
Siemens SIMATIC S7-400 CPU 414-3 6ES7414-3XJ00-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-400 - Programmable logic controller CPU
6ES7414-3XJ00-0AB0 SIMATIC S7-400 CPU 414-3
Siemens documents this CPU 414-3 with separate 384 KB code and data work memory areas, MPI/DP, PROFIBUS DP and IFM connectivity.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7414-3XJ00-0AB0 |
| Product Type | Programmable logic controller CPU |
| Core Function | PLC processing with MPI/DP, PROFIBUS DP and IFM expansion |
| Application or Compatible Series | SIMATIC S7-400 automation systems |
Product Overview
Siemens documents this CPU 414-3 with separate 384 KB code and data work memory areas, MPI/DP, PROFIBUS DP and IFM connectivity.
Official Siemens documentation identifies the product for SIMATIC S7-400 automation systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Balanced Work Memory
The CPU provides 384 KB for code and 384 KB for data.
Distributed I/O Connectivity
MPI/DP and a second PROFIBUS DP interface support distributed devices.
Expandable Load Memory
FLASH or RAM memory cards expand load memory to 64 MB.
Official Specifications
| Firmware Version | V3.1 |
|---|---|
| Engineering Software | STEP 7 V5.2 or higher |
| Work Memory | 384 KB code and 384 KB data |
| Integrated Load Memory | 256 KB RAM |
| FLASH / RAM Card Capacity | Up to 64 MB |
| Bit / Word / Fixed-Point Operation Time | 0.1 µs each |
| Floating-Point Operation Time | 0.6 µs |
| Memory Markers | 8 KB |
| Data Blocks | Maximum 4,095; 64 KB each |
| S7 Counters / Timers | 256 each |
| Total I/O Address Area | 8 KB inputs / 8 KB outputs |
| Process Image | 8 KB inputs / 8 KB outputs |
| Digital / Analog Channels | 65,536 each / 4,096 each |
| Distributed I/O Address Area | MPI/DP 2 KB each; DP 6 KB each |
| Local Data | Maximum 16 KB |
| Consistent Data | Maximum 244 bytes |
Frequently Asked Questions
Which STEP 7 environment supports 6ES7414-3XJ00-0AB0?
The CPU is supported from STEP 7 V5.2 onward.
How is the work memory divided in 6ES7414-3XJ00-0AB0?
The integrated work memory provides 384 KB for code and 384 KB for data.
What load-memory expansion can be used with 6ES7414-3XJ00-0AB0?
A compatible FLASH or RAM memory card can expand load memory up to 64 MB.
Which bus connections are built into 6ES7414-3XJ00-0AB0?
The CPU provides one MPI/DP interface, one PROFIBUS DP interface and a slot for an IFM module.
What execution speed should be considered for 6ES7414-3XJ00-0AB0?
Bit and word operations execute in a minimum of 0.1 microseconds.
Can 6ES7414-3XJ00-0AB0 use ET 200iSP as a DPV1 master?
This older CPU does not provide DPV1 operation, so ET 200iSP is integrated through a GSD file and parameterized with SIMATIC PDM.
Which version details should match when replacing 6ES7414-3XJ00-0AB0?
Hardware revision 8, firmware V3.1.3, the memory card and all three interface assignments should be checked against the installed CPU.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7414-3XJ00-0AB0
- Match SIMATIC S7-400 CPU 414-3 and the full article number character by character.
- Verify engineering software: STEP 7 V5.2 or higher.
- Confirm bit / word / fixed-point operation time: 0.1 µs each.
- Preserve the approved settings and connection records used in SIMATIC S7-400 automation systems.
