Siemens SIMATIC S7-300 6ES7350-2AH00-0AE0 FM 350-2 Counter Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC S7-300
6ES7350-2AH00-0AE0 FM 350-2 Eight-Channel Counter Module
Siemens 6ES7350-2AH00-0AE0 is the SIMATIC S7-300 FM 350-2 eight-channel counter module for 20 kHz signals, 24 V and NAMUR encoders, frequency, speed, period and dosing functions.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7350-2AH00-0AE0 |
| Product Type | Eight-channel counter and measuring function module |
| Core Function | Counts pulses and measures frequency, speed and period from 24 V or NAMUR encoders |
| Application or Compatible Series | SIMATIC S7-300 and ET 200M high-speed counting applications |
Encoder Assignment
Record the encoder type, A/B signal routing, direction input and channel allocation.
Operating Mode
Copy each counter mode, gate, limits, scaling and measurement parameters from the project.
Shielding Layout
Retain the front-connector pinout, shield support and one-hundred-metre cable limit.
Product Overview
Siemens 6ES7350-2AH00-0AE0 is the SIMATIC S7-300 FM 350-2 eight-channel counter module for 20 kHz signals, 24 V and NAMUR encoders, frequency, speed, period and dosing functions.
The module processes eight independent counter channels with 20 kHz A inputs. Counting, frequency, rotational-speed, period and dosing functions are supported. Channels accept 24 V pulse or incremental encoders and NAMUR sensors.
Key Functions
Eight Counting Channels
The module processes eight independent counter channels with 20 kHz A inputs.
Multiple Measurement Modes
Counting, frequency, rotational-speed, period and dosing functions are supported.
Flexible Encoder Inputs
Channels accept 24 V pulse or incremental encoders and NAMUR sensors.
Official Specifications
| Number of Counter Channels | 8 |
|---|---|
| Maximum A-Input Frequency | 20 kHz |
| Maximum B-Input Frequency | 10 kHz |
| Supported Encoder Supply | 24 V DC |
| Supported Encoder Types | 24 V pulse, incremental and NAMUR |
| NAMUR Input Standard | DIN 19234 |
| Maximum Shielded Cable Length | 100 m |
| Maximum Input Delay | 50 µs |
| A-Input Low Level | -3 to 5 V |
| A-Input High Level | 11 to 30.2 V |
| Typical High-Level Input Current | 9 mA |
| NAMUR Low-Level Current | 1.2 mA maximum |
| NAMUR High-Level Current | 2.1 mA minimum |
| Operating Functions | Counting, frequency, speed, period and dosing |
| Electrical Isolation | Inputs isolated from backplane bus and shield |
| Horizontal-Mount Utilization at 40 °C | 100% |
| Horizontal-Mount Utilization at 60 °C | 50% |
| Vertical-Mount Utilization at 40 °C | 50% |
| Official Successor | 6ES7350-2AH01-0AE0 |
Frequently Asked Questions
Which encoders can I connect to 6ES7350-2AH00-0AE0?
Use approved 24-volt pulse or incremental encoders, two-wire sensors or NAMUR sensors.
What is the highest counting frequency for 6ES7350-2AH00-0AE0?
Track A supports up to twenty kilohertz when the pulse and pause ratio meets the stated condition.
Can 6ES7350-2AH00-0AE0 measure rotational speed?
Yes, rotational-speed measurement is one of the supported operating functions.
How should I shield wiring for 6ES7350-2AH00-0AE0?
Terminate the shields at the specified shield support and keep the encoder cable within one hundred metres.
Why does 6ES7350-2AH00-0AE0 reject a counter job?
Check the selected operating mode, channel parameters, gate conditions and assigned control data.
What should I save before replacing 6ES7350-2AH00-0AE0?
Save all encoder types, channel modes, limits, scaling, gate logic and function-block data.
Which replacement is identified for 6ES7350-2AH00-0AE0?
The later listed successor is the FM 350-2 article ending in 2AH01-0AE0, subject to a full project compatibility check.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm the project uses the exact FM 350-2 article or complete the engineering work required for its successor.
- Match every encoder electrical type, channel allocation, direction signal and input frequency.
- Restore counter modes, gates, limits, scaling, software blocks and shield connections.