Siemens SIMATIC S7-300 6ES7332-7ND02-0AB0 SM 332 Analog Output
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC S7-300
6ES7332-7ND02-0AB0 SM 332 Four-Channel 16-Bit Analog Output Module
Siemens 6ES7332-7ND02-0AB0 is the SIMATIC S7-300 SM 332 four-channel analog output module with channel isolation, 16-bit conversion, voltage and current ranges and isochronous operation.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7332-7ND02-0AB0 |
| Product Type | Four-channel isolated analog output module |
| Core Function | Generates precision voltage and current control signals from an S7-300 station |
| Application or Compatible Series | SIMATIC S7-300 and ET 200M automation systems |
Range Assignment
Copy the selected voltage or current range and parameter set for each output channel.
Load Check
Verify cable length, load impedance and capacitive or inductive load limits before energizing outputs.
Connector Transfer
Preserve the twenty-pole terminal assignment, polarity, shields and 24 V load supply.
Product Overview
Siemens 6ES7332-7ND02-0AB0 is the SIMATIC S7-300 SM 332 four-channel analog output module with channel isolation, 16-bit conversion, voltage and current ranges and isochronous operation.
Four channels provide up to 16-bit conversion for common process voltage and current commands. Outputs are isolated from one another, the backplane bus and the electronics supply. The module supports isochronous operation for deterministic S7-300 control cycles.
Key Functions
Precision Analog Output
Four channels provide up to 16-bit conversion for common process voltage and current commands.
Channel Isolation
Outputs are isolated from one another, the backplane bus and the electronics supply.
Isochronous Operation
The module supports isochronous operation for deterministic S7-300 control cycles.
Official Specifications
| Rated Load Voltage | 24 V DC |
|---|---|
| Maximum No-Load Current from L+ | 290 mA |
| Maximum Backplane Current at 5 V DC | 120 mA |
| Typical Power Loss | 3 W |
| Voltage Output Ranges | 0 to 10 V, 1 to 5 V and -10 to 10 V |
| Current Output Ranges | 0 to 20 mA, 4 to 20 mA and -20 to 20 mA |
| Maximum Voltage-Output Short-Circuit Current | 40 mA |
| Maximum Current-Output No-Load Voltage | 18 V |
| Minimum Voltage-Load Impedance | 1 kΩ |
| Maximum Capacitive Load | 1 µF |
| Maximum Current-Load Impedance | 500 Ω |
| Maximum Inductive Load | 1 mH |
| Maximum Shielded Cable Length | 200 m |
| Maximum Conversion Resolution | 16 bits including sign |
| Channel Conversion Time | 200 µs; 640 µs in isochronous mode |
| Settling Time for Resistive Load | 0.2 ms |
| Settling Time for Capacitive Load | 3.3 ms |
| Voltage Basic Error at 25 °C | ±0.02% of output range |
| Isolation Test Voltage | 1,500 V DC |
| Required Front Connector | 20-pin |
Frequently Asked Questions
Which output ranges can I configure on 6ES7332-7ND02-0AB0?
Choose among the specified bipolar or unipolar voltage and current ranges for each channel.
Can 6ES7332-7ND02-0AB0 operate isochronously?
Yes, the module supports isochronous operation with the corresponding S7-300 configuration.
Which front connector does 6ES7332-7ND02-0AB0 require?
Use the specified twenty-pin front connector and reproduce the original channel wiring.
What load limits should I check for 6ES7332-7ND02-0AB0?
Check resistance, capacitance or inductance against the limit that applies to the selected voltage or current output.
How should I handle parameters when replacing 6ES7332-7ND02-0AB0?
Copy channel ranges, diagnostic settings and isochronous parameters from the saved STEP 7 hardware configuration.
What supply is required by 6ES7332-7ND02-0AB0?
Provide a correctly polarized 24-volt DC load supply.
What should I inspect if a channel on 6ES7332-7ND02-0AB0 does not drive its load?
Check the load supply, channel range, wiring polarity, cable continuity, load impedance and diagnostic status.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm the station is configured for the exact four-channel 16-bit SM 332 article and matching parameters.
- Retain the twenty-pin connector mapping, polarity, shields, load supply and channel ranges.
- Check every connected load against the voltage or current output limits before commissioning.