Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7331 7pf01 0ab0 sm331 rtd analog input-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S7-300 6ES7331-7PF01-0AB0 SM 331 RTD Analog Input Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC S7-300

6ES7331-7PF01-0AB0 SM 331 RTD Analog Input Module

Siemens 6ES7331-7PF01-0AB0 is the isolated SIMATIC S7-300 SM 331 eight-channel analog input module for resistance and RTD measurement in S7-300 and ET 200M systems.

At a Glance

Brand Siemens
Model 6ES7331-7PF01-0AB0
Product Type SIMATIC S7-300 SM 331 Analog Input Module
Core Function Acquires resistance and resistance-temperature-detector signals
Application or Compatible Series SIMATIC S7-300 and ET 200M systems

Sensor Selection

Use supported Pt, Ni, LG-Ni or Cu10 resistance thermometers or one of the direct resistance ranges.

Wiring Layout

Choose two-, three- or four-wire resistance wiring and account for uncompensated leads in two-wire mode.

Panel Integration

Provide 24 V DC load voltage and select the required 40-pin front connector separately.

Product Overview

Siemens 6ES7331-7PF01-0AB0 is the isolated SIMATIC S7-300 SM 331 eight-channel analog input module for resistance and RTD measurement in S7-300 and ET 200M systems.

Parameterizable characteristic curves cover Pt100/200/500/1000, Ni100/120/200/500/1000, LG-Ni1000 and Cu10. Eight inputs support 0 to 150 Ω, 0 to 300 Ω and 0 to 600 Ω ranges with 16-bit conversion. Parameterizable diagnostics, diagnostic alarms and limit-value hardware interrupts support maintenance.

Ordering focus: confirm the S7-300 or ET 200M station, 24 V DC supply, 40-pin connector, RTD family or resistance range, two-, three- or four-wire topology, shielding, conversion time and diagnostic settings.

Key Functions

Broad RTD Linearization

Parameterizable characteristic curves cover Pt100/200/500/1000, Ni100/120/200/500/1000, LG-Ni1000 and Cu10.

Flexible Resistance Acquisition

Eight inputs support 0 to 150 Ω, 0 to 300 Ω and 0 to 600 Ω ranges with 16-bit conversion.

Channel Diagnostics and Alarms

Parameterizable diagnostics, diagnostic alarms and limit-value hardware interrupts support maintenance.

Official Specifications

Rated Load Voltage 24 V DC
Maximum Current from L+ Without Load 240 mA
Maximum Current from 5 V Backplane Bus 100 mA
Typical Power Loss 4.6 W
Analog Input Count 8
Supported RTD Families Pt100/200/500/1000; Ni100/120/200/500/1000; LG-Ni1000; Cu10
Direct Resistance Ranges 0 to 150 Ω, 0 to 300 Ω and 0 to 600 Ω
Maximum Shielded Cable Length 200 m
Maximum Resolution with Overrange 16-bit two’s complement
Basic Conversion Time 10 ms per module with up to four channels; 80 ms per module with all eight channels
Interference-Frequency Suppression 400, 60 or 50 Hz
Sensor Wiring Methods Two-wire without resistance correction, three-wire and four-wire
Resistance Operational Error Limit ±0.1% of input range
RTD Operational Error Limit ±1 K
Resistance Basic Error Limit at 25 °C ±0.05% of input range
RTD Basic Error Limit at 25 °C ±0.5 K
Isolation Test Voltage 500 V DC
Required Front Connector 40-pin
Dimensions 40 × 125 × 120 mm
Approximate Weight 272 g

Frequently Asked Questions

Which resistance sensors can I connect to 6ES7331-7PF01-0AB0?

Supported choices include Pt100/200/500/1000, Ni100/120/200/500/1000, LG-Ni1000 and Cu10 sensors.

Does 6ES7331-7PF01-0AB0 support two-, three- and four-wire resistance sensors?

All three methods are supported, but two-wire operation does not compensate lead resistance.

How should I select the direct resistance range for 6ES7331-7PF01-0AB0?

Parameterize the channel for the applicable 0 to 150 Ω, 0 to 300 Ω or 0 to 600 Ω range before commissioning.

What full-channel conversion time should I expect from 6ES7331-7PF01-0AB0?

With all eight channels enabled, the basic conversion time is 80 ms per module.

Which front connector fits 6ES7331-7PF01-0AB0?

The module requires a 40-pin front connector selected for the cabinet wiring method.

How long can the shielded RTD cable be for 6ES7331-7PF01-0AB0?

Shielded field wiring may be up to 200 m long.

What resistance-measurement accuracy should I allow for 6ES7331-7PF01-0AB0?

Allow ±0.05% basic error at 25 °C and ±0.1% operational error across the full temperature range.

Compatibility & Ordering Notes

Before ordering 6ES7331-7PF01-0AB0: confirm the S7-300 or ET 200M station, 24 V DC supply, 40-pin connector, RTD family or resistance range, two-, three- or four-wire topology, shielding, conversion time and diagnostic settings.

Compatibility Checklist

  • Install in a compatible SIMATIC S7-300 rack or ET 200M station.
  • Provide 24 V DC load voltage and verify the backplane-current budget.
  • Select and wire the required 40-pin front connector.
  • Match every channel to the exact RTD family or resistance range.
  • Use three- or four-wire wiring when lead-resistance compensation is required.
Hot Selling Models
EC96 800/1A
27910-341-230-00
BES516-434.S1.X
8045891
3NA7810
SAC-2P-M12MSB/5.0-910/M12FSB
225-U
3TH20 40-0AE0
6ES7132-4BF00-0AA0
ABB MS116-0.25 1SAM250000R1002
ABB F204 A 2CSF204101R1250
PKZM0-12 NHI-E-11-PKZ0
3RA1921-1B
5SY4140-5 5SY41 MCBA40
6ES5777-0BB00

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.