Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7331 7kb02 0ab0 s7 300 sm 331 two channel analog input module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7331-7KB02-0AB0 S7-300 SM 331 Two-Channel Analog Input Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC S7-300 SM 331

6ES7331-7KB02-0AB0 S7-300 SM 331 Two-Channel Analog Input Module

A configurable two-channel analog module for voltage, current, thermocouple and resistance measurements.

At a Glance

Brand Siemens
Model 6ES7331-7KB02-0AB0
Product Type Analog input module
Core Function Digitizing analog measurements
Application Process signal acquisition

Acquire different signal types

The module accepts bipolar voltage ranges, current signals, selected thermocouples and Pt100 or Ni100 resistance sensors.

Match measurement timing

Selectable integration times of 2.5, 16.67, 20 and 100 ms support different noise-rejection settings.

Support fault response

Diagnostic alarms and a red SF indicator assist troubleshooting, while channel 0 supports limit-value interrupts.

Product Overview

6ES7331-7KB02-0AB0 interfaces analog process signals with an S7-300 controller using selectable measurement ranges and integration times.

Thermocouple compensation, resistance wiring options and diagnostic alarms support temperature and general analog measurement tasks.

Ordering focus: Select the measurement range and wiring arrangement, and provide a 20-pin front connector.
Key Functions

Acquire different signal types

The module accepts bipolar voltage ranges, current signals, selected thermocouples and Pt100 or Ni100 resistance sensors.

Match measurement timing

Selectable integration times of 2.5, 16.67, 20 and 100 ms support different noise-rejection settings.

Support fault response

Diagnostic alarms and a red SF indicator assist troubleshooting, while channel 0 supports limit-value interrupts.

Official Specifications
Analog Input Quantity 2 channels; resistance measurement uses 1 channel
Resolution 9, 12 or 14 bits, depending on configuration
Voltage Ranges ±80 mV, ±250 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V and 1–5 V
Current Ranges 0–20 mA, 4–20 mA, ±3.2 mA, ±10 mA and ±20 mA
Current Input Resistance 25 Ω
Resistance Ranges 0–150 Ω, 0–300 Ω and 0–600 Ω
Supported RTDs Pt100 and Ni100
Thermocouple Types E, J, K and N
Resistance Measurement Current 1.67 mA typical
Integration Times 2.5, 16.67, 20 and 100 ms
Basic Conversion Times 3, 17, 22 and 102 ms
Noise Rejection Frequencies 400, 60, 50 and 10 Hz
Load Supply 24 V DC; maximum 30 mA
Backplane Current Maximum 50 mA at 5 V DC
Typical Power Loss 1 W
Shielded Signal Cable Limit 200 m; 50 m for ±80 mV and thermocouples
Resistance Wiring 2-wire, 3-wire or 4-wire
Front Connector 20 pins
Dimensions (W × H × D) 40 × 125 × 120 mm
Approximate Weight 250 g
Official source:Siemens product data sheet
Frequently Asked Questions

Can 6ES7331-7KB02-0AB0 measure a 4–20 mA transmitter?

The current inputs support a 4–20 mA range and connection of two-wire or four-wire transmitters.

How many resistance sensors can I connect to 6ES7331-7KB02-0AB0?

Resistance measurement is available on one channel.

Can I connect a Pt1000 directly to 6ES7331-7KB02-0AB0?

The supported resistance-temperature sensors are Pt100 and Ni100.

Which cold-junction compensation methods can I use with 6ES7331-7KB02-0AB0?

Thermocouple operation supports internal compensation, external compensation and a configurable fixed comparison point.

What cable limit applies to a thermocouple on 6ES7331-7KB02-0AB0?

Keep shielded thermocouple and ±80 mV signal cables within 50 m.

Are the two channels of 6ES7331-7KB02-0AB0 electrically isolated from each other?

The channels are not isolated from one another, although they are isolated from the backplane bus.

Which channel can generate a limit-value interrupt on 6ES7331-7KB02-0AB0?

Limit-value interrupt operation is available on channel 0.

Compatibility & Ordering Notes
Before ordering 6ES7331-7KB02-0AB0: Select the measurement range and wiring arrangement, and provide a 20-pin front connector.

Before installation

  • Provide the required 20-pin front connector and configure the selected measurement range.
  • Use one channel for resistance measurement and choose the appropriate 2-wire, 3-wire or 4-wire arrangement.
  • Select the integration time together with the required interference-rejection frequency.
  • Keep general shielded analog wiring within 200 m and thermocouple or ±80 mV wiring within 50 m.
Hot Selling Models
0756-1305/0060-0050
VABV-S4-2HS-G18-2T1
DUO-SG-02
WTV43P1321
08P1398/S35AL
BCS0062 BCS M12T4D2-PSM80G-S04G
02351-93650 OR120126
DB-XK13520-3441
MZ2Q-CFSPSKP0
BCS00M8
B7622.021.024-01
NEN6-8GM45-E2-V3
MS100200DX
MS100210DX
DZF-18-80-APA

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.