Siemens SIMATIC S7-300 6ES7331-1KF02-0AB0 SM 331 Analog Input
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC S7-300
6ES7331-1KF02-0AB0 SM 331 Analog Input Module
Siemens 6ES7331-1KF02-0AB0 is the SIMATIC S7-300 SM 331 isolated analog input module with eight channels for voltage, current, resistance and resistance-temperature sensors at up to 13-bit resolution.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7331-1KF02-0AB0 |
| Product Type | Isolated eight-channel analog input module |
| Core Function | Converts process voltage, current, resistance and RTD signals for the controller |
| Application or Compatible Series | SIMATIC S7-300 and ET 200M systems |
Signal Assignment
Set each measurement group for the connected voltage, current, resistance or RTD sensor type.
Protection Limits
Keep applied voltage and current below the stated continuous and short-duration destruction limits.
Connector Mapping
Transfer all forty-pole front-connector wiring and measurement-range settings channel by channel.
Product Overview
Siemens 6ES7331-1KF02-0AB0 is the SIMATIC S7-300 SM 331 isolated analog input module with eight channels for voltage, current, resistance and resistance-temperature sensors at up to 13-bit resolution.
The module accepts voltage, current, resistance and several resistance-temperature sensor types. Galvanic isolation separates the analog channels from the S7-300 backplane bus. Multiple bipolar and unipolar voltage ranges plus standard current ranges support varied field instruments.
Key Functions
Multi-Signal Acquisition
The module accepts voltage, current, resistance and several resistance-temperature sensor types.
Isolated Measurement
Galvanic isolation separates the analog channels from the S7-300 backplane bus.
Configurable Ranges
Multiple bipolar and unipolar voltage ranges plus standard current ranges support varied field instruments.
Official Specifications
| Backplane Current at 5 V DC | 90 mA maximum |
|---|---|
| Typical Power Loss | 0.4 W |
| Maximum Digital Resolution | 13 bit |
| Conversion Time | 66 ms |
| Front Connector | 1 x 40-pole |
| Maximum Continuous Voltage Input | 12 V |
| Short-Duration Voltage Limit | 30 V for no more than 1 s |
| Maximum Current Input | 40 mA |
| Supported Voltage Ranges | 0 to 10 V; 1 to 5 V; ±1 V; ±5 V; ±10 V; ±50 mV; ±500 mV |
| Voltage Input Resistance | 100 kΩ |
| Supported Current Range | 0 to 20 mA |
| Current Input Resistance | 100 Ω |
| Resistance Measurement Channels | 8 |
| Supported Resistance Sensors | Pt100, Ni100, Ni1000, LG-Ni1000, PTC and KTY |
| Thermocouple Measurement | Not supported |
| Channel Isolation | Inputs isolated from backplane bus |
| Dimensions | 40 x 125 x 120 mm |
| Approximate Weight | 250 g |
Frequently Asked Questions
Which field signals may be wired to 6ES7331-1KF02-0AB0?
The module accepts supported voltage, current, resistance and resistance-temperature sensor signals.
How must measurement ranges be set on 6ES7331-1KF02-0AB0?
Configure each channel group for the connected sensor type and its exact electrical range.
Can 6ES7331-1KF02-0AB0 read thermocouples directly?
No, this module is not designed for direct thermocouple measurement.
What input overload must be avoided on 6ES7331-1KF02-0AB0?
Keep voltage below twelve volts continuously and current below forty milliamperes.
How long does 6ES7331-1KF02-0AB0 need for a conversion?
The specified conversion time is sixty-six milliseconds.
Which connector wiring should be copied when exchanging 6ES7331-1KF02-0AB0?
Copy every terminal assignment from the forty-pole front connector together with the channel-group settings.
What should I compare if readings from 6ES7331-1KF02-0AB0 are incorrect?
Compare the configured range, sensor wiring method, polarity, shielding and input resistance requirements.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm the station is a SIMATIC S7-300 or ET 200M system with a compatible hardware configuration.
- Check every connected sensor against the supported voltage, current, resistance or RTD ranges.
- Preserve the forty-pole connector mapping and module parameters before replacement.