Siemens 6ES7321-1FH00-0AA0 S7-300 SM 321 16 DI 120/230 V AC
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the 120/230 V AC input variant for the intended field signals.
- Keep every load voltage on the same phase.
- Select the required 20-pin front connector and respect the grouped-isolation arrangement.
- Account for the fixed 25 ms input delay and the absence of module interrupt and diagnostic functions.
6ES7321-1FH00-0AA0 S7-300 SM 321 16 DI 120/230 V AC
An SM 321 with sixteen 120/230 V AC inputs, isolated in groups of four, using one 20-pin front connector.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7321-1FH00-0AA0 |
| Product Type | Digital input module |
| Core Function | Acquires AC field signals |
| Application | S7-300 I/O racks |
Sixteen AC inputs
The input circuit accepts 120/230 V AC signals at 47–63 Hz with IEC 61131 type 1 characteristics.
Grouped input isolation
The sixteen channels are isolated in groups of four, with optocoupler isolation from the backplane bus.
Direct channel indication
Green input-status LEDs show the input states without a group-error SF indicator or module diagnostic alarms.
Product Overview
6ES7321-1FH00-0AA0 acquires sixteen AC input signals through the SM 321 input arrangement.
The module uses optocoupler separation from the backplane, groups its inputs in sets of four and provides green input-status indication, with a fixed input delay rather than configurable interrupt or diagnostic functions.
Key Functions
Sixteen AC inputs
The input circuit accepts 120/230 V AC signals at 47–63 Hz with IEC 61131 type 1 characteristics.
Grouped input isolation
The sixteen channels are isolated in groups of four, with optocoupler isolation from the backplane bus.
Direct channel indication
Green input-status LEDs show the input states without a group-error SF indicator or module diagnostic alarms.
Official Specifications
| Input channels | 16 |
|---|---|
| Input voltage and frequency | 120/230 V AC, 47–63 Hz |
| Input characteristic | IEC 61131 type 1 |
| Logic thresholds | Logic 0: 0–40 V; logic 1: 79–264 V |
| Typical input current | 6.5 mA at 120 V/60 Hz; 16 mA at 230 V/50 Hz |
| Input delay | 25 ms; not parameterizable |
| Maximum input cable lengths | 1000 m shielded; 600 m unshielded |
| Two-wire sensor quiescent current | Maximum 2 mA |
| Backplane current | Maximum 29 mA at 5 V DC |
| Typical power loss | 4.9 W |
| Input isolation | Groups of four; optocoupler isolation from the backplane |
| Isolation test voltage | 4000 V DC |
| Simultaneously active inputs | All 16 up to 60 °C horizontal or 40 °C vertical |
| Input indication | Green input-status LEDs |
| Interrupts and diagnostics | No hardware interrupt, diagnostic alarm or diagnostic function |
| Front connection | One 20-pin front connector |
| Dimensions | 40 × 125 × 120 mm |
| Approximate weight | 240 g |
Frequently Asked Questions
Can I use different supply phases across the input groups of 6ES7321-1FH00-0AA0?
All load voltages must have the same phase.
Can I change the input-filter delay on 6ES7321-1FH00-0AA0?
The input delay is fixed at 25 ms and is not parameterizable.
Which front connector should I order for 6ES7321-1FH00-0AA0?
The module requires a 20-pin front connector.
Can 6ES7321-1FH00-0AA0 accept a two-wire sensor with 3 mA off-state current?
The permitted two-wire-sensor quiescent current is at most 2 mA.
Will 6ES7321-1FH00-0AA0 generate a hardware interrupt when an input changes?
The module does not provide hardware interrupts.
Is every channel on 6ES7321-1FH00-0AA0 isolated separately?
The input channels are isolated in groups of four rather than individually.
Can all channels on 6ES7321-1FH00-0AA0 remain active at 60 degrees Celsius?
All sixteen inputs may be active up to 60 °C in horizontal installation, while vertical installation is limited to 40 °C for that condition.