EN
Siemens SIMATIC S7-300 CPU 319-3 PN/DP 6ES7318-3EL01-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-300 - high-performance programmable logic controller CPU
6ES7318-3EL01-0AB0 SIMATIC S7-300 CPU 319-3 PN/DP
Siemens specifies the CPU 319-3 PN/DP with 2 MB work memory, two PROFIBUS-capable interfaces and an Ethernet/PROFINET interface with a two-port switch.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7318-3EL01-0AB0 |
| Product Type | high-performance programmable logic controller CPU |
| Core Function | Executes S7-300 control programs with MPI, PROFIBUS DP and PROFINET communication |
| Application or Compatible Series | High-capacity SIMATIC S7-300 central and distributed automation systems |
Product Overview
Siemens specifies the CPU 319-3 PN/DP with 2 MB work memory, two PROFIBUS-capable interfaces and an Ethernet/PROFINET interface with a two-port switch.
Official Siemens documentation identifies the product for High-capacity SIMATIC S7-300 central and distributed automation systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Fast Program Execution
Short instruction times support demanding machine and process-control applications.
Three Communication Interfaces
MPI/DP, an additional PROFIBUS DP interface and PROFINET provide flexible networking.
Large Work Memory
Two megabytes of integrated work memory supports extensive programs and data.
Official Specifications
| Hardware Functional Status | 01 |
|---|---|
| Firmware Version | V3.2 |
| Engineering Software | STEP 7 V5.5 or higher |
| Rated Supply Voltage | 24 V DC |
| Typical Power Loss | 14 W |
| Integrated Work Memory | 2,048 KB |
| Retentive Data Block Memory | 700 KB |
| Load Memory | Micro Memory Card required; up to 8 MB |
| Bit Operation Time | 0.004 µs |
| Word Operation Time | 0.01 µs |
| Fixed-Point Operation Time | 0.01 µs |
| Floating-Point Operation Time | 0.04 µs |
| First Interface | MPI/PROFIBUS DP, up to 12 Mbit/s |
| Second Interface | PROFIBUS DP master/slave |
| Third Interface | Ethernet/PROFINET with 2-port switch |
| Isochronous Operation | Via second PROFIBUS DP or PROFINET interface |
| Default Process Image | 256 bytes inputs / 256 bytes outputs |
| Operating Temperature | 0 to 60 °C |
| Dimensions | 120 x 125 x 130 mm |
| Approximate Weight | 1,250 g |
Frequently Asked Questions
Which memory card is required before starting 6ES7318-3EL01-0AB0?
A SIMATIC Micro Memory Card is required, with capacities supported up to 8 MB.
How are the communication interfaces arranged on 6ES7318-3EL01-0AB0?
The CPU has MPI/DP, a second PROFIBUS DP master/slave interface and PROFINET with a two-port switch.
What supply should the cabinet provide for 6ES7318-3EL01-0AB0?
Provide a regulated 24 V DC supply and allow for approximately 14 W of power loss.
How much working memory does 6ES7318-3EL01-0AB0 include?
The integrated work memory is 2,048 KB.
Can 6ES7318-3EL01-0AB0 run an isochronous application?
Yes. Isochronous operation is available through the second PROFIBUS DP or the PROFINET interface.
Which STEP 7 release supports 6ES7318-3EL01-0AB0?
Use STEP 7 V5.5 or a later supported release.
What cabinet space is needed for 6ES7318-3EL01-0AB0?
Allow 120 x 125 x 130 mm and an approximate module weight of 1,250 g.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7318-3EL01-0AB0
- Match SIMATIC S7-300 CPU 319-3 PN/DP and the full article number character by character.
- Verify firmware version: V3.2.
- Confirm integrated work memory: 2,048 KB.
- Preserve the approved settings and connection records used in High-capacity SIMATIC S7-300 central and distributed automation systems.
