EN
Siemens SIMATIC S7-300 CPU 315F-2 DP 6ES7315-6FF04-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-300F - failsafe programmable logic controller CPU
6ES7315-6FF04-0AB0 SIMATIC S7-300 CPU 315F-2 DP
Siemens specifies the CPU 315F-2 DP with 384 KB work memory, integrated MPI, a second PROFIBUS DP master/device interface and required Micro Memory Card.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7315-6FF04-0AB0 |
| Product Type | failsafe programmable logic controller CPU |
| Core Function | Runs standard and failsafe control programs with MPI and PROFIBUS DP communication |
| Application or Compatible Series | Safety-related SIMATIC S7-300 automation and distributed I/O systems |
Product Overview
Siemens specifies the CPU 315F-2 DP with 384 KB work memory, integrated MPI, a second PROFIBUS DP master/device interface and required Micro Memory Card.
Official Siemens documentation identifies the product for Safety-related SIMATIC S7-300 automation and distributed I/O systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Failsafe Automation
The F-CPU executes safety-related and standard control logic.
Dual RS485 Interfaces
MPI plus PROFIBUS DP provide programming and distributed-I/O connectivity.
Maintenance-Free Retention
Program and data retention is provided by the required Micro Memory Card.
Official Specifications
| Hardware Functional Status | 01 |
|---|---|
| Firmware Version | V3.3 |
| Engineering Software | STEP 7 V5.5 SP1 or higher with Distributed Safety |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 19.2 to 28.8 V DC |
| External Supply Protection | Minimum 2 A recommended |
| Mains Failure Buffering | 5 ms |
| Rated Current Consumption | 850 mA |
| Typical No-Load Current | 150 mA |
| Inrush Current | 3.5 A |
| Typical Power Loss | 4.5 W |
| Integrated Work Memory | 384 KB |
| Load Memory | Micro Memory Card required; up to 8 MB |
| Bit Operation Time | 0.05 µs |
| Word Operation Time | 0.09 µs |
| Fixed-Point Operation Time | 0.12 µs |
| Floating-Point Operation Time | 0.45 µs |
| Interfaces | MPI plus PROFIBUS DP master/device |
| Module Width | 40 mm |
| Approximate Net Weight | 0.344 kg |
Frequently Asked Questions
Which safety engineering software is needed for 6ES7315-6FF04-0AB0?
Use STEP 7 with the supported Distributed Safety option and the required hardware support package.
What power-supply window applies to 6ES7315-6FF04-0AB0?
The permitted range is 19.2 to 28.8 V DC around the 24 V nominal supply.
How much work memory is integrated in 6ES7315-6FF04-0AB0?
The CPU provides 384 KB of work memory.
Does 6ES7315-6FF04-0AB0 require a memory card?
Yes. A Micro Memory Card is required and capacities up to 8 MB are supported.
Which communications are built into 6ES7315-6FF04-0AB0?
An MPI interface and a second PROFIBUS DP master/device interface are integrated.
What short power interruption can 6ES7315-6FF04-0AB0 bridge?
The stored-energy time is specified as 5 ms.
How wide is 6ES7315-6FF04-0AB0 in an S7-300 rack?
The module width is 40 mm.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7315-6FF04-0AB0
- Match SIMATIC S7-300 CPU 315F-2 DP and the full article number character by character.
- Verify firmware version: V3.3.
- Confirm external supply protection: Minimum 2 A recommended.
- Preserve the approved settings and connection records used in Safety-related SIMATIC S7-300 automation and distributed I/O systems.
