Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7231 0hf22 0xa0 simatic s7 200 em 231 analog input module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7231-0HF22-0XA0 SIMATIC S7-200 EM 231 Analog Input Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC S7-200

6ES7231-0HF22-0XA0 SIMATIC S7-200 EM 231 Analog Input Module

Eight differential analog inputs with selectable voltage ranges and 0–20 mA current measurement on channels 6 and 7.

At a Glance

Brand Siemens
Model 6ES7231-0HF22-0XA0
Product Type Analog input expansion module
Core Function Acquisition of analog voltage and current signals
Application SIMATIC S7-22X CPU systems

Eight differential measurements

The input bank acquires eight differential analog signals for the S7-200 process image.

Voltage and selected current inputs

Voltage ranges include 0–5 V, 0–10 V, ±2.5 V and ±5 V, with 0–20 mA available on channels 6 and 7.

Defined conversion and diagnostics

A 250 µs per-channel conversion time and red EXTF indication support predictable acquisition and fault identification.

Product Overview

6ES7231-0HF22-0XA0 adds eight differential analog input channels to an S7-22X CPU for process measurement and machine signal acquisition.

The EM 231 supports unipolar and bipolar voltage ranges, while its final two channels also accept 0–20 mA signals, giving the expansion a defined mix of voltage and current measurement capability.

Ordering focus: Allocate current signals only to channels 6 and 7, select the required voltage range and keep the sensor common-mode voltage within the 12 V limit.
Key Functions

Eight differential measurements

The input bank acquires eight differential analog signals for the S7-200 process image.

Voltage and selected current inputs

Voltage ranges include 0–5 V, 0–10 V, ±2.5 V and ±5 V, with 0–20 mA available on channels 6 and 7.

Defined conversion and diagnostics

A 250 µs per-channel conversion time and red EXTF indication support predictable acquisition and fault identification.

Official Specifications
Analog channels 8 differential inputs
Selectable voltage ranges 0–5 V, 0–10 V, ±2.5 V and ±5 V
Current measurement 0–20 mA on channels 6 and 7 only
Voltage input resistance 10 MΩ
Per-channel conversion time 250 µs
Maximum resolution with overrange 12 bits including sign
Bipolar conversion codes −32000 to +32000
Unipolar conversion codes 0 to 32000
Maximum common-mode voltage 12 V
Voltage input destruction limit 30 V maximum
Current input destruction limit 40 mA maximum
Maximum L+ current without load 60 mA
Maximum backplane current 20 mA at 5 V DC
Typical power loss 2 W
Maximum shielded sensor cable 100 m
Input electrical isolation No isolation between analog inputs
External fault indication Red EXTF LED
Dimensions and mass 71.2 × 80 × 62 mm (W × H × D); approximately 190 g
Frequently Asked Questions

Where should I connect a 0–20 mA transmitter on 6ES7231-0HF22-0XA0?

Current measurement is available only on analog channels 6 and 7.

Can 6ES7231-0HF22-0XA0 measure both positive and negative voltage signals?

The module supports bipolar ±2.5 V and ±5 V ranges as well as unipolar 0–5 V and 0–10 V ranges.

Can I wire a Pt100 or thermocouple directly to 6ES7231-0HF22-0XA0?

The analog inputs do not support direct resistance-thermometer, resistance or thermocouple measurement.

What numeric span should my PLC scaling use for 6ES7231-0HF22-0XA0?

Use 0–32000 for unipolar signals or −32000 to +32000 for bipolar signals.

What common-mode constraint applies to differential inputs on 6ES7231-0HF22-0XA0?

Keep the common-mode voltage at or below the specified maximum of 12 V.

How quickly does 6ES7231-0HF22-0XA0 convert one input channel?

Each channel has a conversion time of 250 µs.

Which indicator helps identify an external fault on 6ES7231-0HF22-0XA0?

The red EXTF LED provides external-fault indication.

Compatibility & Ordering Notes
Before ordering 6ES7231-0HF22-0XA0: Allocate current signals only to channels 6 and 7, select the required voltage range and keep the sensor common-mode voltage within the 12 V limit.

Before installation

  • Use the EM 231 expansion only with an S7-22X CPU.
  • Assign 0–20 mA signals to channels 6 and 7 and select the voltage ranges for the remaining measurements.
  • Route shielded sensor cable within 100 m and keep the differential input common-mode voltage within 12 V.
  • Keep normal signals within their selected measuring range because the 30 V and 40 mA destruction limits are not operating ranges.
Hot Selling Models
H07V-K 4520031
31212
30874
BUFFER/24DC/20
PC400/600 050634-210
OK5001/OKF-FPKG
Quint-PS-3x400-500AC/24DC/5 2938594
A38B
A35B
7072.200
AO2/SF-PAC
D-321-XDR-E
1HC-sti-AX 350A 09110012651
1916/440
VUVGL14B52TG181R8L

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.