Siemens SIMATIC S7-1200 6ES7222-1HF30-0XB0 SM 1222 8 DO Relay 2 A
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7222-1HF30-0XB0 SM 1222 8-Relay Output Module
Official Siemens S7-1200 relay-output data for load switching, panel wiring and replacement engineering.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7222-1HF30-0XB0 |
| Product Type | SIMATIC S7-1200 SM 1222 digital output module |
| Core Function | Switches eight field loads through mechanical relay contacts |
| Application / Compatible Series | SIMATIC S7-1200 V3.0-and-earlier signal-module stations |
Exact Identification
Match the full Siemens order number and installed hardware version.
Engineering Fit
Confirm electrical data, terminals and the target SIMATIC system.
Configuration Check
Verify wiring and configuration against the official Siemens manual.
Product Overview
6ES7222-1HF30-0XB0 is officially identified by Siemens as SM 1222 8-Channel Relay Digital Output Module in the SIMATIC S7-1200 product range.
Siemens identifies this SIMATIC S7-1200 SM 1222 module with eight relay digital outputs rated at 2 A. Siemens lists 6ES7222-1HF32-0XB0 as the successor and requires the installed hardware and engineering configuration to be checked before replacement.
Ordering focus: verify the complete 6ES7222-1HF30-0XB0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.
Key Functions
Model-Specific Configuration
6ES7222-1HF30-0XB0: SM 1222 digital output module with eight 2 A relay outputs.
System Connection
SIMATIC S7-1200 backplane-bus connection with the required front connection.
Replacement Control
Use the full 6ES7222-1HF30-0XB0 article number and official Siemens documentation to verify the installed configuration before replacement.
Official Specifications
| Permissible Coil Supply | 20.4 to 28.8 V DC |
|---|---|
| Backplane-Bus Current | 120 mA max. at 5 V DC |
| Relay-Coil Current | 11 mA per energized relay |
| Power Loss | 4.5 W typical |
| Digital Outputs | 8 |
| Output Grouping | 2 groups |
| Output Technology | Mechanical relay |
| Switched Voltage Range | 5 to 30 V DC or 5 to 250 V AC |
| Maximum Resistive Load | 2 A per output |
| Lamp Load | 30 W DC or 200 W AC max. |
| New-Contact Resistance | 0.2 Ω max. |
| Overload Protection | None; external protection required |
| Coil-to-Contact Isolation | 1,500 V AC |
| Maximum Current per Common | 10 A |
| Switching Delay | 10 ms max. |
| Maximum Relay Frequency | 1 Hz |
| Mechanical Life | 10,000,000 operations, no load |
| Contact Life at Rated Load | 100,000 operations |
| Simultaneous Outputs | 8 |
| Cable Length | 500 m shielded or 150 m unshielded |
Frequently Asked Questions
What power supply is required for the relay coils on 6ES7222-1HF30-0XB0?
Provide 24 V DC within the permissible 20.4 to 28.8 V range for the relay coils.
Which loads can be switched by 6ES7222-1HF30-0XB0?
The mechanical contacts can switch 5 to 30 V DC or 5 to 250 V AC, with a 2 A maximum resistive load per output.
How are the outputs grouped on 6ES7222-1HF30-0XB0?
The eight relay outputs are arranged in two groups, and each common is rated for up to 10 A.
Does 6ES7222-1HF30-0XB0 include electronic short-circuit protection?
No. Select external branch and load protection appropriate to the connected circuit.
What switching rate should be respected for 6ES7222-1HF30-0XB0?
The maximum relay switching frequency is 1 Hz, with a switching delay of up to 10 ms.
Which spare terminal block fits 6ES7222-1HF30-0XB0?
For V3.0-and-earlier signal modules, Siemens lists the 7-pin tin-plated terminal-block kit 6ES7292-1AG30-0XA0.
What output state can be configured when the CPU leaves RUN for 6ES7222-1HF30-0XB0?
The system can retain the last value or apply a configured substitute value; the default substitute is 0.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7222-1HF30-0XB0
- Match the complete 6ES7222-1HF30-0XB0 article number without shortening the suffix.
- Confirm compatibility with the installed SIMATIC S7-1200 product range.
- Verify SM 1222 digital output module with eight 2 A relay outputs.
- Confirm SIMATIC S7-1200 backplane-bus connection with the required front connection.