Siemens 6ES7221-1BH22-0XA0 EM 221 16-Channel Digital Input Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use an S7-22X CPU with the required expansion capacity.
- Match 24 V DC sinking or sourcing sensor connections to the input circuit.
- Keep two-wire sensor quiescent current at or below 1 mA.
- Observe four-channel isolation groups and the applicable cable-length limit.
- Allow up to 70 mA from the 5 V DC backplane supply.
6ES7221-1BH22-0XA0 EM 221 16-Channel Digital Input Module
A 16-channel EM 221 input expansion with grouped optocoupler isolation and plug-in I/O terminals for SIMATIC S7-22X CPUs.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7221-1BH22-0XA0 |
| Product Type | EM 221 digital input expansion module |
| Core Function | Acquires 16 sinking or sourcing 24 V DC input signals |
| Application | S7-22X CPU expansion for machine sensors and discrete status signals |
16 discrete inputs
Connect 24 V DC sensors using sinking or sourcing input wiring.
Grouped isolation
The optocoupler-isolated input channels are arranged in groups of four.
Serviceable terminals
Plug-in I/O terminals support field-wiring maintenance.
Product Overview
6ES7221-1BH22-0XA0 expands a SIMATIC S7-22X CPU with sixteen 24 V DC digital inputs for machine interlocks, position detection and discrete process status.
The input stage supports sinking and sourcing connections, including two-wire sensors within the specified off-state current limit; grouped isolation and defined switching thresholds support orderly field wiring.
Key Functions
Discrete signal acquisition
Sixteen IEC 61131 type 1 inputs accept a 0 to 5 V low signal and a +15 to +30 V high signal.
Sensor and cable integration
Two-wire sensors are supported with a maximum quiescent current of 1 mA, with cable limits of 500 m shielded or 300 m unshielded.
Grouped field connections
Optocoupler isolation is provided in groups of four channels, while plug-in I/O terminals allow the terminal assembly to be handled during maintenance.
Official Specifications
| Rated input voltage | 24 V DC |
|---|---|
| Input characteristic | IEC 61131 type 1 |
| Signal 0 voltage | 0 to 5 V |
| Signal 1 voltage | +15 to +30 V |
| Typical signal 1 current | 4 mA |
| Maximum rising-edge input delay | 4.5 ms at rated input voltage |
| Maximum shielded cable length | 500 m |
| Maximum unshielded cable length | 300 m |
| Maximum two-wire sensor quiescent current | 1 mA |
| Input electrical isolation | Optocoupler; channel groups of four |
| Isolation test | 500 V AC for 1 minute |
| I/O terminal connection | Plug-in terminals |
| Maximum 5 V backplane current | 70 mA |
| Typical power loss | 3 W |
| Dimensions (W × H × D) | 71.2 × 80 × 62 mm |
| Approximate weight | 160 g |
Frequently Asked Questions
Which CPU generation accepts 6ES7221-1BH22-0XA0?
The expansion module is intended for SIMATIC S7-22X CPUs.
Can 6ES7221-1BH22-0XA0 accommodate both sinking and sourcing sensor connections?
The input circuitry supports both sinking and sourcing connections at 24 V DC.
What off-state leakage is acceptable for two-wire sensors on 6ES7221-1BH22-0XA0?
A connected two-wire sensor must have a quiescent current no greater than 1 mA.
How are the input isolation groups organized on 6ES7221-1BH22-0XA0?
Optocoupler isolation separates the digital inputs in groups of four channels.
How much 5 V expansion-bus current should be reserved for 6ES7221-1BH22-0XA0?
The module requires up to 70 mA from the 5 V DC backplane supply.
Which field-cable limits apply to 6ES7221-1BH22-0XA0?
The maximum permitted input-cable length is 500 m with shielding or 300 m without shielding.
Are the field I/O terminals removable on 6ES7221-1BH22-0XA0?
The module uses plug-in I/O terminals.