Siemens 6ES7195-7HA00-0XA0 SIMATIC ET 200M BM PS/IM Active Bus Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the PS307 2 A supply on this base or place larger PS307 supplies on a separate standard rail.
- Use BM IM/IM for a redundant interface pair rather than substituting this base.
- Choose the matching active-bus mounting arrangement and downstream I/O bus modules.
- Fit the included bus-module cover as required by the assembled station.
6ES7195-7HA00-0XA0 SIMATIC ET 200M BM PS/IM Active Bus Module
The BM PS/IM base for one PS and one IM153 in an ET 200M active-backplane configuration.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7195-7HA00-0XA0 |
| Product Type | Active backplane bus module |
| Core Function | Build the station power-supply and interface section |
| Application | ET 200M stations with active bus modules |
PS and interface position
The base holds the station power-supply and IM153 section.
Active backplane
It forms part of the configuration for I/O module exchange during RUN.
Protective cover
The bus-module cover is included with the base.
Product Overview
6ES7195-7HA00-0XA0 forms the BM PS/IM section of an ET 200M active-backplane assembly.
The base accommodates an IM153 and a PS307 2 A supply in the specified arrangement. Larger PS307 5 A and 10 A power supplies are mounted on a separate standard S7 rail instead of this base.
Key Functions
Support the station front section
The BM PS/IM carries the power-supply and interface-module positions at the start of the active backplane.
Build for module exchange
Active bus modules provide the station arrangement for changing I/O modules during RUN when the system is configured for that function.
Protect unused bus connections
The included bus-module cover is used as part of the assembled station protection.
Official Specifications
| Module Position Arrangement | 1 power-supply position and 1 IM153 position |
|---|---|
| Dimensions (W × H × D) | 97 × 92 × 30 mm |
| Approximate Weight | 111 g |
| Included Bus Cover | Bus module cover |
| Operating Ambient Temperature (ET 200M) | 0 to 60 °C in horizontal mounting; 0 to 40 °C in vertical mounting |
| Storage and Transport Temperature | −40 to +70 °C in original packaging |
| Permissible Relative Humidity | 10% to 95%, non-condensing |
| Degree of Protection (ET 200M Assembly) | IP20 |
Frequently Asked Questions
Which PS307 supply can be installed on 6ES7195-7HA00-0XA0?
The PS307 2 A supply is compatible with the BM PS/IM arrangement.
Can I mount a PS307 5 A or 10 A supply on 6ES7195-7HA00-0XA0?
No, those larger supplies must be fitted to a separate standard S7 mounting rail.
Is 6ES7195-7HA00-0XA0 the base for two redundant IM153 modules?
No, a redundant pair of IM153 modules uses a BM IM/IM bus module.
Does 6ES7195-7HA00-0XA0 provide the two 40 mm I/O positions?
No, those positions are provided by the separate BM 2 × 40 bus module.
Is the cover included with 6ES7195-7HA00-0XA0?
Yes, the bus-module cover is included.
Where is 6ES7195-7HA00-0XA0 used in an ET 200M station?
It provides the power-supply and IM153 section of the active-bus configuration.
Can 6ES7195-7HA00-0XA0 alone turn a standard station into a complete RUN-exchange arrangement?
No, the station also requires the corresponding active bus modules, mounting arrangement and system configuration.