EN
Siemens 6ES7193-4CB30-0AA0 SIMATIC ET 200S TM-E15C24-01 Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the electronic module terminal plan for positions 1–8.
- Select the spring-clamp version required by the cabinet wiring practice.
- Route any necessary AUX1 field connection to an accessible terminal module.
- Keep ferruled conductors within 0.14–1.5 mm².
SIEMENS SIMATIC ET 200S
6ES7193-4CB30-0AA0 SIMATIC ET 200S TM-E15C24-01 Terminal Module
An eight-connection spring-terminal base for 15 mm ET 200S electronics with a continuous, untapped AUX1 bus.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-4CB30-0AA0 |
| Product Type | Electronic module base |
| Core Function | Modular field termination |
| Application | ET 200S sensor and actuator wiring |
Full numbered terminal set
The electronic module assigns all positions from 1 to 8 in the 2 × 4 layout.
Spring termination
Cage Clamp terminals secure the wires after the opening tool is withdrawn.
No auxiliary tap
AUX1 passes through this base without local A4/A8 terminal access.
Product Overview
6ES7193-4CB30-0AA0 forms the TM-E15C24-01 spring-terminal wiring base beneath a 15 mm ET 200S electronic module.
Its eight numbered positions support the terminal assignments of the inserted electronics, and its separate auxiliary bus continues through the station without a local field connection.
Key Functions
Expose the electronic circuit terminals
The installed module defines each field connection across numbered terminals 1 through 8.
Connect prepared wires by spring clamp
A 3 mm screwdriver opens the spring terminal for an 11 mm stripped conductor end.
Maintain the shared bus path
Solid power buses and AUX1 continuity carry the station potentials through adjacent bases.
Official Specifications
| Terminal arrangement | 2 × 4 connections |
|---|---|
| Connection technology | Spring terminals (Cage Clamp) |
| AUX1 routing | Continuous to the potential group on the left |
| AUX1 terminal access | No terminal access |
| Bare solid and flexible conductor range | 0.14–2.5 mm² |
| Flexible conductor range with ferrule | 0.14–1.5 mm² |
| Wire stripping length | 11 mm |
| Conductors per connection | 1; alternatively 2 totaling up to 1.5 mm² in a shared ferrule |
| Maximum wire insulation diameter | 3.1 mm at 1.5 mm²; 3.8 mm at 2.5 mm² |
| Wiring tool | Screwdriver with 3 mm blade |
| Dimensions (W × H × D) | 15 × 132 × 43 mm |
| Approximate module weight | 65 g |
Frequently Asked Questions
Are positions 4 and 8 available to the electronic circuit on 6ES7193-4CB30-0AA0?
Yes, all numbered terminals 1–8 are assigned by the electronic module on this -01 base.
Does 6ES7193-4CB30-0AA0 support Spring termination for mobile equipment?
No, AUX1 remains a pass-through bus without local terminal access on this version.
How do I insert a flexible wire into 6ES7193-4CB30-0AA0?
Strip 11 mm, open the spring terminal with a 3 mm screwdriver, insert the wire fully and withdraw the screwdriver.
Can a 2.5 mm² ferruled lead be installed in 6ES7193-4CB30-0AA0?
No, ferruled flexible conductors are limited to 1.5 mm² even though bare solid or flexible conductors may be up to 2.5 mm².
Will 6ES7193-4CB30-0AA0 occupy more rail width than one 15 mm electronic module?
No, each base is 15 mm wide and matches the width of the supported electronic module.
How much does a single 6ES7193-4CB30-0AA0 base weigh?
One TM-E15C24-01 terminal module weighs approximately 65 g.
Can I replace the terminal box of 6ES7193-4CB30-0AA0 without taking the base off the rail?
Yes, replacement of the terminal box does not require removal of the terminal module from the rail.
