Siemens SIMATIC ET 200M 6ES7153-2BA02-0XB0 IM 153-2 High Feature Interface Module

Overview

SIEMENS · SIMATIC ET 200M

6ES7153-2BA02-0XB0 IM 153-2 High Feature Interface Module

The 6ES7153-2BA02-0XB0 IM 153-2 High Feature is a PROFIBUS-DP interface for ET 200M stations with up to twelve S7-300 modules, redundancy capability and timestamping support.

At a Glance

Brand	Siemens
Model	6ES7153-2BA02-0XB0
Product Type	Redundancy-capable PROFIBUS-DP interface module
Core Function	Connects up to twelve S7-300 I/O modules to an ET 200M PROFIBUS-DP station
Application or Compatible Series	SIMATIC ET 200M stations requiring redundancy, timestamping or isochronous operation

Exact Identification

Match 6ES7153-2BA02-0XB0 character by character before replacement.

Interface Check

Confirm the installed supply, terminals, network and field wiring.

Project Backup

Preserve the validated configuration and application data before exchange.

Product Overview

The 6ES7153-2BA02-0XB0 IM 153-2 High Feature is a PROFIBUS-DP interface for ET 200M stations with up to twelve S7-300 modules, redundancy capability and timestamping support.

The interface supports as many as twelve S7-300 modules in one station. Redundancy, timestamping and isochronous functions support demanding process applications. The interface supports 64-channel modules and expanded HART auxiliary variables.

Ordering focus: match the exact IM 153-2 High Feature revision, bus module, redundancy design, firmware and ET 200M project.

Key Functions

Expanded ET 200M Capacity

The interface supports as many as twelve S7-300 modules in one station.

High-Feature Operation

Redundancy, timestamping and isochronous functions support demanding process applications.

Extended Module Data

The interface supports 64-channel modules and expanded HART auxiliary variables.

Official Specifications

Module Designation	IM 153-2 High Feature
Station Platform	SIMATIC ET 200M
Network Interface	PROFIBUS-DP
Maximum I/O Modules	12 S7-300 modules
Redundant Operation	Supported
Timestamping	Supported
Isochronous Mode	Supported
64-Channel I/O Modules	Supported
Timestamped Digital Inputs per Slot	Up to 32
HART Auxiliary Variables	Expanded quantity structure supported
Slave Initiative	Supported for Drive ES and Switch ES
Approximate Net Weight	0.286 kg

Official source:Siemens technical data for 6ES7153-2BA02-0XB0.

Frequently Asked Questions

How many I/O modules can 6ES7153-2BA02-0XB0 operate?

A station may contain up to twelve compatible S7-300 modules.

Can 6ES7153-2BA02-0XB0 be used in a redundant ET 200M station?

Yes, redundancy is supported when the approved bus modules and project architecture are used.

Which timestamping function is available with 6ES7153-2BA02-0XB0?

The interface can timestamp as many as thirty-two digital inputs per slot.

Does 6ES7153-2BA02-0XB0 support 64-channel modules?

Yes, the high-feature interface supports the documented 64-channel I/O modules.

What should be compared before replacing 6ES7153-2BA02-0XB0?

Check the bus module, redundancy layout, firmware, station address and complete STEP 7 configuration.

How should 6ES7153-2BA02-0XB0 be commissioned in isochronous mode?

Restore the timing parameters and verify synchronization with the DP master.

What post-installation test is required for 6ES7153-2BA02-0XB0?

Confirm both DP paths where applicable, all module diagnostics and the complete process image.

Compatibility & Ordering Notes

Before ordering 6ES7153-2BA02-0XB0: match the exact IM 153-2 High Feature revision, bus module, redundancy design, firmware and ET 200M project.

Compatibility Checklist

• Confirm the installed bus module supports this interface revision.
• Retain the complete ET 200M module order and PROFIBUS parameters.
• Validate redundancy, timestamping and isochronous functions used by the project.

Hot Selling Models