Siemens SIMATIC ET 200S IM151-7 CPU FO 6ES7151-7AB00-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC DP ET 200S
6ES7151-7AB00-0AB0 SIMATIC ET 200S IM151-7 CPU FO
The IM151-7 CPU FO combines 48 KB work memory with an integrated fiber-optic PROFIBUS DP slave interface for distributed ET 200S control tasks.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7151-7AB00-0AB0 |
| Product Type | distributed CPU interface module with fiber-optic PROFIBUS |
| Core Function | Executes local control tasks and exchanges data as an intelligent DP slave |
| Application or Compatible Series | ET 200S stations engineered with STEP 7 and optical PROFIBUS DP |
Exact Identification
Match 6ES7151-7AB00-0AB0 character by character and confirm the complete SIMATIC ET 200S IM151-7 CPU FO designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The IM151-7 CPU FO combines 48 KB work memory with an integrated fiber-optic PROFIBUS DP slave interface for distributed ET 200S control tasks.
The interface module executes a local STEP 7 program directly in the ET 200S station. A simplex fiber-optic interface provides the documented DP slave connection. A SIMATIC Micro Memory Card carries the matched program and configuration for commissioning and replacement.
Key Functions
Distributed CPU Operation
The interface module executes a local STEP 7 program directly in the ET 200S station.
Optical PROFIBUS Connection
A simplex fiber-optic interface provides the documented DP slave connection.
Memory-Card Project Storage
A SIMATIC Micro Memory Card carries the matched program and configuration for commissioning and replacement.
Official Specifications
| Hardware Functional Status | 04 |
|---|---|
| Firmware Version | V1.1 |
| Work Memory | 48 KB |
| Engineering Baseline | STEP 7 V5.1 or later |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 20.4 to 28.8 V DC |
| Reverse-Polarity Protection | Yes |
| Maximum Supply Current | 250 mA |
| Maximum Backplane Output Current | 700 mA at 5 V DC |
| Typical Power Loss | 3.3 W |
| PROFIBUS Operating Role | DP slave |
| Physical Bus Interface | Fiber optic with simplex connector |
| Battery | Not fitted |
| Required Storage Medium | SIMATIC Micro Memory Card |
Frequently Asked Questions
Does 6ES7151-7AB00-0AB0 run its own user program inside an ET 200S station?
Yes; the distributed CPU executes a local STEP 7 program within the station.
Which PROFIBUS role does 6ES7151-7AB00-0AB0 use?
It operates as an intelligent DP slave through its optical bus interface.
What storage medium is required for 6ES7151-7AB00-0AB0?
Use the specified SIMATIC Micro Memory Card containing the matched project.
Which engineering baseline supports 6ES7151-7AB00-0AB0?
Use STEP 7 V5.1 or a later compatible release.
What supply range is permitted for 6ES7151-7AB00-0AB0?
Provide 20.4 to 28.8 V DC at the power terminals.
Can copper PROFIBUS cabling connect directly to 6ES7151-7AB00-0AB0?
No; the installed variant uses a simplex fiber-optic connection.
What should be backed up before replacing 6ES7151-7AB00-0AB0?
Preserve the STEP 7 project, memory-card contents, station address and distributed-I/O configuration.
Compatibility & Ordering Notes
Compatibility Checklist
- Use it only in an ET 200S station configured for the IM151-7 CPU FO variant.
- Keep the optical PROFIBUS address, topology and termination arrangement aligned with the project.
- Insert the correct Micro Memory Card before commissioning the replacement.