Siemens 6ES7151-1AA05-0AB0 SIMATIC ET 200S IM 151-1 Standard Interface
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the Standard IM 151-1 entry in the PROFIBUS station configuration.
- Check both the 244-byte process-data limits and the 63-module station limit.
- Install the termination module and the appropriate PROFIBUS connector.
- Select a bus cable length appropriate to the transmission rate and the installation topology.
6ES7151-1AA05-0AB0 SIMATIC ET 200S IM 151-1 Standard Interface
IM 151-1 Standard with PROFIBUS DP V0/V1, 244 input and 244 output bytes, and support for up to 63 I/O modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7151-1AA05-0AB0 |
| Product Type | Distributed I/O interface module |
| Core Function | PROFIBUS station communication |
| Application | ET 200S PROFIBUS DP stations |
DP V0 and V1 station interface
The interface supports PROFIBUS DP V0 and V1 communication at rates up to 12 Mbit/s.
Modular station expansion
Up to 63 I/O modules can be connected within the two-meter station width.
Diagnostics and synchronized data
SF, BF and supply LEDs support diagnostics, while SYNC, FREEZE and direct slave exchange support fieldbus operation.
Product Overview
6ES7151-1AA05-0AB0 links an ET 200S distributed I/O station to a PROFIBUS DP controller through a nine-pin D-sub bus connection.
The Standard interface supports up to 63 I/O modules within a two-meter station width, with diagnostic alarms, slave-to-slave exchange and an included termination module.
Key Functions
DP V0 and V1 station interface
The interface supports PROFIBUS DP V0 and V1 communication at rates up to 12 Mbit/s.
Modular station expansion
Up to 63 I/O modules can be connected within the two-meter station width.
Diagnostics and synchronized data
SF, BF and supply LEDs support diagnostics, while SYNC, FREEZE and direct slave exchange support fieldbus operation.
Official Specifications
| Input address capacity | 244 bytes |
|---|---|
| Output address capacity | 244 bytes |
| Maximum station expansion | 63 I/O modules; 2 m total width |
| Fieldbus interface | PROFIBUS DP V0/V1; RS485 |
| Transmission rates | 9.6 kbit/s to 12 Mbit/s |
| Maximum PROFIBUS cable length | 1200 m; permitted distance depends on the selected transmission rate |
| Bus connection | 9-pin D-sub female socket |
| Maximum interface output current | 80 mA |
| Supply current | 200 mA maximum from 1L+ |
| Supply interruption buffering | 20 ms |
| Typical power loss | 3.3 W |
| Data services | SYNC, FREEZE and direct slave-to-slave exchange |
| Diagnostic indicators | BF red; SF red; supply ON green |
| Electrical isolation | Between electronics and PROFIBUS DP |
| Insulation test voltage | 500 V DC |
| Operating temperature | 0 to +60°C |
| Dimensions and weight | 45 × 119.5 × 75 mm (W × H × D); approximately 150 g |
Frequently Asked Questions
How large a station can I build behind 6ES7151-1AA05-0AB0?
The interface permits up to sixty-three I/O modules within a total station width of two meters.
How should I divide the process-data budget for 6ES7151-1AA05-0AB0?
Allow up to 244 bytes for inputs and another 244 bytes for outputs.
Can I connect 6ES7151-1AA05-0AB0 to a PROFINET IO controller?
This interface communicates through PROFIBUS DP rather than PROFINET IO.
Which bus plug mates with 6ES7151-1AA05-0AB0?
Use a suitable PROFIBUS connector for the nine-pin D-sub female socket.
Does ordering 6ES7151-1AA05-0AB0 include the station termination module?
The article includes the termination module.
Can I exchange data directly between slaves through 6ES7151-1AA05-0AB0?
The interface supports direct slave-to-slave data exchange.
Which LEDs on 6ES7151-1AA05-0AB0 help distinguish a bus fault from a supply issue?
The BF and SF LEDs indicate bus or group faults while the green ON LED monitors the supply.