Siemens 6ES7151-1AA02-0AB0 SIMATIC ET 200S IM151-1 STANDARD Interface
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use a PROFIBUS DP master and the 9-pin D-sub bus connection.
- Limit the station to 63 connected modules.
- Keep input and output data within 128 bytes each.
- Keep the 5 V backplane load within 700 mA.
- Fit the included terminating module at the end of the ET 200S station.
6ES7151-1AA02-0AB0 SIMATIC ET 200S IM151-1 STANDARD Interface
A PROFIBUS DP IM151-1 STANDARD interface with 128 bytes each of input and output data and capacity for 63 station modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7151-1AA02-0AB0 |
| Product Type | IM151-1 STANDARD interface module |
| Core Function | Exchanging station I/O with a PROFIBUS master |
| Application | ET 200S distributed I/O stations |
Station module mix
Up to 63 power, electronic or motor-starter modules can be connected.
PROFIBUS link
An RS485 9-pin D-sub interface communicates at up to 12 Mbit/s.
Included station end
The interface is supplied with a terminating module for the station assembly.
Product Overview
6ES7151-1AA02-0AB0 connects an ET 200S station to PROFIBUS DP, exchanging up to 128 bytes of inputs and 128 bytes of outputs with the master.
The interface supports a mix of power, electronic and motor-starter modules, provides the station backplane supply and includes separate bus-fault, group-error and supply-monitoring indications.
Key Functions
Link the station through PROFIBUS
The RS485 interface uses a 9-pin D-sub socket and supports transmission rates up to 12 Mbit/s.
Supply and exchange station data
The interface provides up to 700 mA at 5 V for the backplane and supports 128 bytes each of input and output data.
Expose station operating indications
BF and SF red indicators show bus and group errors, while the green ON indicator monitors the 24 V supply.
Official Specifications
| Maximum Connected Station Modules | 63 power, electronic or motor-starter modules |
|---|---|
| Input and Output Data Capacity | 128 bytes each |
| Maximum Supply Current from 1L+ | 200 mA |
| Maximum Backplane Output | 5 V DC, 700 mA |
| Supply-Failure Buffering Time | 20 ms |
| Fieldbus Connection | PROFIBUS DP over RS485; 9-pin D-sub socket |
| Maximum Transmission Rate | 12 Mbit/s |
| Supported Bus Rates | 9.6, 19.2, 45.45, 93.75, 187.5 and 500 kbit/s; 1.5, 3, 6 and 12 Mbit/s |
| Status Indications | BF red, SF red and 24 V ON green |
| Electrical Isolation | PROFIBUS DP isolated from the electronics |
| Insulation Test Voltage | 500 V DC |
| Included Station Component | Terminating module |
| Dimensions (W × H × D) | 45 × 119.5 × 75 mm |
| Approximate Weight | 150 g |
Frequently Asked Questions
Can 6ES7151-1AA02-0AB0 connect directly to a PROFINET IO controller?
This interface uses PROFIBUS DP and does not support PROFINET IO.
Can 6ES7151-1AA02-0AB0 operate with a mix of power, electronic and motor-starter modules?
The station can contain up to 63 modules from those groups.
Does the 63-module count of 6ES7151-1AA02-0AB0 replace the I/O data limit?
The station must also remain within 128 bytes each of input and output data.
Is a terminating module supplied with 6ES7151-1AA02-0AB0?
The terminating module is included.
How much backplane current is available from 6ES7151-1AA02-0AB0?
The 5 V backplane output provides up to 700 mA.
Which LEDs distinguish bus and group errors on 6ES7151-1AA02-0AB0?
The red BF indicator identifies a bus fault and the red SF indicator identifies a group error.
Can 6ES7151-1AA02-0AB0 participate in SYNC and FREEZE operation?
The interface supports both SYNC and FREEZE services.