Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7138 4fa05 0ab0 simatic et 200s 4 8 f di profisafe module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7138-4FA05-0AB0 SIMATIC ET 200S 4/8 F-DI PROFIsafe Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200S

6ES7138-4FA05-0AB0 SIMATIC ET 200S 4/8 F-DI PROFIsafe Module

24 V DC F-DI module with eight single-channel or four two-channel inputs, two protected sensor supplies and configurable input delay.

At a Glance

Brand Siemens
Model 6ES7138-4FA05-0AB0
Product Type Fail-safe digital input module
Core Function Acquisition of safety-related sensor signals
Application ET 200S PROFIsafe stations

Selectable input architecture

Eight single-channel inputs or four two-channel inputs support the specified sensor evaluation arrangement.

Protected sensor supplies

Two sensor-supply outputs provide a 300 mA rating with electronic short-circuit protection.

PROFIsafe integration

The module supports safety-related station operation and readable short-circuit diagnostics.

Product Overview

6ES7138-4FA05-0AB0 acquires safety-related digital signals in an ET 200S PROFIsafe station.

The thirty-millimeter module supports single-channel or two-channel evaluation, protected sensor supplies and diagnostic alarms, with use in a PROFINET configuration supported through an IM 151-3 HF interface.

Ordering focus: Match the F-system configuration, sensor evaluation architecture, sensor-supply load and required safety performance.
Key Functions

Selectable input architecture

Eight single-channel inputs or four two-channel inputs support the specified sensor evaluation arrangement.

Protected sensor supplies

Two sensor-supply outputs provide a 300 mA rating with electronic short-circuit protection.

PROFIsafe integration

The module supports safety-related station operation and readable short-circuit diagnostics.

Official Specifications
Input architecture 8 single-channel inputs or 4 two-channel inputs
Nominal supply and input voltage 24 V DC
Input characteristic IEC 61131 Type 1
Typical high-state input current 3.7 mA
Configurable input delay 0.3–17 ms for rising and falling transitions
Sensor-supply output count 2
Sensor-supply current rating 300 mA
Sensor-supply voltage At least L+ minus 1.5 V
Electronic protection threshold 0.7–1.8 A
Typical power loss 4 W
Address space 6 input bytes and 4 output bytes
Maximum sensor cable 500 m shielded or unshielded
Input isolation From the backplane; no channel-to-channel or input-to-L+ isolation
Safety integrity by architecture Up to SIL 2 single-channel or SIL 3 two-channel, IEC 61508
Performance level Up to PL e, ISO 13849-1
Safety category Up to Category 4, EN 954
Diagnostic display Red SF group-fault LED and green input-status LEDs
Dimensions and weight 30 × 81 × 52 mm (W × H × D); approximately 78 g
Frequently Asked Questions

How many two-channel sensor circuits can I evaluate with 6ES7138-4FA05-0AB0?

The module supports four two-channel input circuits.

Does single-channel operation of 6ES7138-4FA05-0AB0 have the same SIL limit as two-channel operation?

The stated maximum is SIL 2 for single-channel use and SIL 3 for two-channel use.

Can I use 6ES7138-4FA05-0AB0 in a PROFINET station?

The module supports a PROFINET configuration with an IM 151-3 HF interface.

Can I adjust the input delay of 6ES7138-4FA05-0AB0 for the sensor application?

Rising and falling input delays are configurable between 0.3 and 17 ms.

How many sensor-supply outputs are available on 6ES7138-4FA05-0AB0?

The module provides two protected sensor-supply outputs.

What cable-length limit should I apply to sensors connected to 6ES7138-4FA05-0AB0?

The specified maximum is 500 m for shielded or unshielded sensor cables.

Can the controller read short-circuit diagnostics from 6ES7138-4FA05-0AB0?

The module provides readable short-circuit diagnostic information and diagnostic alarms.

Compatibility & Ordering Notes
Before ordering 6ES7138-4FA05-0AB0: Match the F-system configuration, sensor evaluation architecture, sensor-supply load and required safety performance.

Before installation

  • Configure the correct PROFIsafe module and F-parameters in the compatible station.
  • Select the single-channel or two-channel evaluation required by the safety application.
  • Match sensor-supply loads and configured delays to the connected sensors.
  • Apply the achievable safety classification to the complete engineered safety function.
Hot Selling Models
Allen-Bradley 140MT-C3E-C10
3RV1915-1B
MV 1361
080-111 / 054220
NFE02.1-230-008
PSR-SPP-24UC/URM/3X1/3X2 2981842
ABB MS132 MS132-12 1SAM350000R1012
IE5336 IEB3002BBPKG/0.185M/PH/AS610RT
3RT1025-1AR60
6AG1193-4CB30-2AA0
S403MC10 2CCS573001R0104
5SY4501-7
3RT1024-1AC20
S5-110S 6ES5716-0BB50
516-377-EO-C-S49-00.2

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.